Homelite 360 or Mac 10 10S

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

redunshee

Addicted to ArboristSite
Joined
Oct 16, 2007
Messages
6,994
Reaction score
2,434
Location
Texas, but spend time in Vermont
While I'm an old Poulan fan of the 3700's and 4000's I have an unusual interest in the above two saws. They both are 57cc and am wondering if one gas an advantage over the other. Or, is it a Chevy ,Ford deal.
 
10-10s is a much better saw cutting wise

Sent from my SM-G920V using Tapatalk
 
My observation would be if you want RPM and chain speed the 10-10S has an edge, like all the other 10-10's before it, it is a hot little saw. The 360 has a full set of decent antivibe, the transformers can be hard to find, it has decent power with respectable RPM. I also thing the 10-10S has a little more balls than the 360 too, I don't think you would have an issue running a 28" on the 10-10 but I'm not sure the 360 could manage a 28 and still keep up the chain speed.
 
While I'm an old Poulan fan of the 3700's and 4000's I have an unusual interest in the above two saws. They both are 57cc and am wondering if one gas an advantage over the other. Or, is it a Chevy ,Ford deal.
20190313_180821.jpg
20190313_180836.jpg if your interested in a 361 Beaird Poulan, I'm looking for Mac 10 series parts , I like trading.
 
My nod goes to the 10-10 but I am biased. The lack of antivibe never bothered me and I find I dont think about it whether I'm running a saw with or without.
 
Were are you located

Sent from my SM-G920V using Tapatalk
 
I have a few 10-10
f3ec6c0eb078d4ef0142d53de75b4db4.jpg


Sent from my SM-G920V using Tapatalk
 
Back
Top