Jred dump........

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Lol, unknown? Or you can't say? That's cool though you'll get a new saw. Sounds like they have lots. Any plans for it or are you gonna run it as is.
 
Lol, unknown? Or you can't say? That's cool though you'll get a new saw. Sounds like they have lots. Any plans for it or are you gonna run it as is.
They didnt say an amount, just offered to refund money or return the saw for a different one. I'll likely convert it to a 2172 at some point. It will be replacing my Husky 460.
 
Times 4 sitting in the bed of my truck. Repacked nice. All new and shiny, chain is still in a sealed bag.
63b781080995e6f2ca72fd68b1913ea2.jpg
f75d853a814d351f165ef4dbe9785211.jpg
9f3d7317a104c757cdfceec47e7ae2a1.jpg


Sent from my SM-J727P using Tapatalk
 
Received my first Order of 2166’s and they arrived perfect. I will be reselling some of them as soon as I get them modded to be 2172’s. I will sell the first few for $550 plus shipping or we can meet if near Ohio.
f46c88a5a296b89dffc9cd3b4512f074.jpg
4ea60b5f8fa40f223de1cee5bf330701.jpg
8654c52dc7ba41340c817605f80a42af.jpg



Sent from my iPhone using Tapatalk
 
Received my first Order of 2166’s and they arrived perfect. I will be reselling some of them as soon as I get them modded to be 2172’s. I will sell the first few for $550 plus shipping or we can meet if near Ohio.
f46c88a5a296b89dffc9cd3b4512f074.jpg
4ea60b5f8fa40f223de1cee5bf330701.jpg
8654c52dc7ba41340c817605f80a42af.jpg



Sent from my iPhone using Tapatalk
I like the newer handles.
How much for non converted ones.
Will you be adding the larger dogs that come on the 2172 vs the single smaller inner dogs. I like the larger dogs for 24 or 28" bars, but prefer the small one for a 20" so I can get as much out of it as possible.
How many did you get/will you have available at that price.
 
I like the newer handles.
How much for non converted ones.
Will you be adding the larger dogs that come on the 2172 vs the single smaller inner dogs. I like the larger dogs for 24 or 28" bars, but prefer the small one for a 20" so I can get as much out of it as possible.
How many did you get/will you have available at that price.

Just getting started and planned on converting 2 saws for now. They will be as pictured and I will not be buying additional dogs for now.
There next shipment are smaller saws CS2238 and CS2245... not sure if I will be able to get more CS2166’s. Hope that helps. The saws I have will be shipped with the original 24” bars also.


Sent from my iPhone using Tapatalk
 
Just getting started and planned on converting 2 saws for now. They will be as pictured and I will not be buying additional dogs for now.
There next shipment are smaller saws CS2238 and CS2245... not sure if I will be able to get more CS2166’s. Hope that helps. The saws I have will be shipped with the original 24” bars also.


Sent from my iPhone using Tapatalk
I thought you guys(family that's into Ebay) were going to make a bulk purchase. Will they have more available for a while then.
I have one that's converted I would sell too, it's been used a little, but it's in great condition.
They are good running saws, more forgiving in the cut than an early 2171/372 once the transfers are ground and the carbs readjusted, and stock they have more power than the early open port 365's or the later closed port versions(mostly the 365 specials, but there were some non specials with closed ports also).
 
I thought you guys(family that's into Ebay) were going to make a bulk purchase. Will they have more available for a while then.
I have one that's converted I would sell too, it's been used a little, but it's in great condition.
They are good running saws, more forgiving in the cut than an early 2171/372 once the transfers are ground and the carbs readjusted, and stock they have more power than the early open port 365's or the later closed port versions(mostly the 365 specials, but there were some non specials with closed ports also).

I told you my current plans. Yes my family is big into eBay. We have thousands of dollars of goods for sale . I am starting out slow with the saw purchase.
Anybody interested in CS2238’s and CS2245’s? I can buy a bunch of the models ???


Sent from my iPhone using Tapatalk
 
So my 4 have an "R" melted in the bottom of them. 1 has a small scuff of the wrap, others look 100% perfect and new upon quick initial inspection. I will do a more thorough inspection later today.

Sent from my SM-J727P using Tapatalk
 
I told you my current plans. Yes my family is big into eBay. We have thousands of dollars of goods for sale . I am starting out slow with the saw purchase.
Anybody interested in CS2238’s and CS2245’s? I can buy a bunch of the models ???


Sent from my iPhone using Tapatalk
So now that you are "in" with the owner of the business selling the jreds will you be helping more guys who have not gotten what they were sold, or does that cut into your profits.
 

Attachments

  • Screen Shot 2019-03-19 at 9.32.48 AM.png
    Screen Shot 2019-03-19 at 9.32.48 AM.png
    129.6 KB · Views: 31

Latest posts

Back
Top