I have a Jonsered 2152 Uticor. I am sure I saw more than 1 article on Uticor but now I can't find it/them. Looking at other listings with pictures I haven't seen the recoil housing with a "Uticor" on the sticker like mine. Is there a difference in Uticor vs, non-Uticor in the 2152 versions
My uticor saw might have been straight gassed. BUT when I tore it down (Vac tested OK) I saw the fuel Line nearly kinked and then noticed the grommet/boot for the fuel line is 180 degrees from what I believe to be right and this may have been a cause of running lean?? Seems a shame as the cylinder is scored and the rest of the saw looks like new like 9.8 on a 10 scale I got this saw with 35 others and a tag on it said "cyl scored 5/12" (Date i am thinking) The gas wasn't Terrible for sitting 6 or 7 years.
I read one old post stating that J 2152 was a Husky 353 and J2153 is the Husky 346 Any information will be helpful and appreciated If this is the same as the Husky 346 XP I think it deserves a new OEM Cylinder and Piston etc.
I am Keeping this saw for a fun saw ...
This question is right up SAWTROLLs alley
My uticor saw might have been straight gassed. BUT when I tore it down (Vac tested OK) I saw the fuel Line nearly kinked and then noticed the grommet/boot for the fuel line is 180 degrees from what I believe to be right and this may have been a cause of running lean?? Seems a shame as the cylinder is scored and the rest of the saw looks like new like 9.8 on a 10 scale I got this saw with 35 others and a tag on it said "cyl scored 5/12" (Date i am thinking) The gas wasn't Terrible for sitting 6 or 7 years.
I read one old post stating that J 2152 was a Husky 353 and J2153 is the Husky 346 Any information will be helpful and appreciated If this is the same as the Husky 346 XP I think it deserves a new OEM Cylinder and Piston etc.
I am Keeping this saw for a fun saw ...
This question is right up SAWTROLLs alley