DCS6421 BREAK IN!!!!!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Paid $322 for this HD rental.

Send me your muffler and carb and I’ll fix them for you. Shoot send me the whole saw and I’ll fix it for you.
6EAF3B15-3EEE-454B-823C-D6309E8F6EC6.jpeg
 
Couple hundred more and I would have sold you this ported 7900.
View attachment 742464
Really tempting but My whole thing is to do all the work I can myself. Im going to put a bore kit on after some time and if I blow it up I'll PM you! Haha its going to take alot of time and effort but I will learn.

Sent from my LM-G710VM using Tapatalk
 
Seriously though mod the muffler. They’re so choked up and have a cat in them. Also pull the carb and make a cut in the high jet with a dremel so you can adjust it with a flat blade.
608B64FC-3D31-4070-B73A-4599BBD2CF73.jpeg D3ECAFF0-2C29-4C4D-ACFD-B31B76ECD863.jpeg E0E44E20-C9D9-4376-AC04-8F0087B41AD8.jpeg
 
Correction: as stated, get rid of the cat and ya gotta be able to adjust the carb. That’s pretty much standard procedure and almost goes without saying. Almost.

Otherwise run it like you stole it!

At 40:1.. :yes:
 
Thanks guys already have a DD feom previous saw. Appreciate the help and suggeations I'll mix a 40:1 and get screaming!

Sent from my LM-G710VM using Tapatalk
 
This saw is amazing. I put a quality 40:1 in turned the H jet out 1/4 turn from factory setting. I'm guessing thats fat enough for break in as it lightly 4 strokes on and off under load. EXTREAMILY satisfied with this saw. It completly blew away my expectations. I really appreciate the help guys.

Sent from my LM-G710VM using Tapatalk
 
Back
Top