Are chainsaws intentionally sold weak out-of-box? Q's on mods & chains

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

eye.heart.trees

arborjunky
Joined
Jun 25, 2019
Messages
148
Reaction score
26
Location
Tampa-Area
tl;dr- Which, if any, modifications are worth doing to an out-of-box chainsaw?
~~~~~~~~~~
I'm hoping to understand this a bit more, I learned about two general 'types' of what I can only describe as intentional-weakening of chainsaws (out-of-box) and want to learn more, specifically:

#1 - It seems that many (maybe a majority?) of new saws are being made in such a way that simple modifications are freeing-up a ton of power, for instance I'm thinking most of the 200t-->201t progression where everyone hates the 201, unless you sent it to brad sneller to get it modified in which case it out-performs the 200t...I've got a few saws and expect that if I opened all 3 up and expanded/bored their mufflers, gently ported the intake/exhaust ports on the carb, removed the limiter(s) on the carb/shaved the key on the crank to slightly advance the timing, I expect this'd make them all stronger- but would it be shortening their lives in a significant way? I'm seeing so many ways that people 'free up' power, seeing people like Reg Coates go over how weak regular saws feel after using ported ones (which, I guess, would be a whole level above what I'm talking about, right? I don't think the slight sandings of the intake/exhaust ports counts as a full/real porting does it?) it just makes it seem like something that'd be nice to learn down the line, so any&everything anyone can offer on this would be hugely appreciated :)

#2 - The chain on my 18", with the highest tooth//link ratio of all my saws/chains, I thought it was the most aggressive / strongest, just learned it's 'a safety chain' and in fact is weaker than the regular oregon 'skip chains' I have on my 14" & 10" saws (1 tooth every 3rd link), at any rate I was needing to get backup chains and have realized just how ignorant I was about chain-types, am still unsure if it's 'smart' for me to get the every-third-link oregon skip-chains or if I should consider others (also looking at bars, am plenty content with the bars on my rear-handled saws but the 10" Double-Guard oregon bar on my climbing-saw I'm not so sure about after seeing all the dime- and quarter-tipped bars, between varying weights / pitches / tips I'm just lost on why one would choose one over the other!

Thanks a ton for any advice or directions to learn more about these things, I used the Steve's Small Engine Saloon series to learn basic tuning but the second I google for anything beyond that it's immediately way over my head!!

(also am curious if people ever modify a right-side dog/spike onto a saw that's not OEM-fit for one? Am looking at my 18" poulan pro and wishing it had 2 sets of dogs (maybe they'll be needed once I get the 'safety chain' off this thing!!) but would have to rig it up myself, it 'looks simple' but would really love to hear that someone else has done similar before considering it myself!)
[PS I should mention I consider sharpening [stihl 2-in-1] frequently to be requisite, I don't use pre-made fuel but use 90&92oct eth-free with Stabil & syn.oil, & am very precise mixing it to 40:1! I was happy with how they ran once 'overhauled' and once I had new chains on - excepting my 18" - so it's pretty neat thinking there's unlocked power, just hoping it's not akin to trying to turbocharge a Kia!!!]
 
Are you mistaking your perception of "weakening" for the true reason of reliability?

MTBF (mean time before failure) is a huge consideration for manufacturers when they release products into the market. The last thing they want is to be giving away warranty replacements.

Sure, you can tune and run an engine on aircraft fuel or alcohol at triple the rpm for more power, I would not expect it to last more than a few minutes before something shatters or explodes.
 
My older Husqvarna saws kicked butt. I plugged the govenors and installed a 8 pin floating rim and drum in my 266se and 2100cd they became beasts. Even my little 240sg was a fast cutter with the same setup. No porting on my work saws. My shops saws were built for the fair. In the woods breaking them in was unbelievable.
 
No dogs needed on your 4218 Poulan pro, just get you a good LP semi chisel chain. Only mod I have done on one of those beside a good chain was to open up the exhaust port on the muffler some and flip the exhaust deflector over. After that a good tuning. I have experimented on the depth rackers some to get a good cut but not to go overboard to the point that it's too dangerous to use. Would not speed the time trying to get more power out of one of these if you plan on using it instead of the not lasting long and be scrap pile bound.

Steve
 
Are you mistaking your perception of "weakening" for the true reason of reliability?

MTBF (mean time before failure) is a huge consideration for manufacturers when they release products into the market. The last thing they want is to be giving away warranty replacements.

Sure, you can tune and run an engine on aircraft fuel or alcohol at triple the rpm for more power, I would not expect it to last more than a few minutes before something shatters or explodes.
I agree.

Porting work usually opens up more top end power. You start running the saw into rpms it was not designed for to take advantage of the port work...

Some mods like a muffler mod actually extend the life of the saw by keeping more heat out of the engine.

The candle that burns twice as bright dies twice as fast
 
To make the saws last longer we must run them oil rich. Back then I mixed my two stroke about 2.3 gallons to one can of husky oil instead of 2.5 gallons.
 
There are changes that make sense and some do not. For most part the newest saws have restrictions that allow the saws to be sold because of EPA requirements. Some times muffler mods actually help all around. Then porting a saw can hurt longevity done too aggressively. My two pennies say use a conservative approach and you will not be disappointed as there are several people who do modifications here. I prefer older saws that are easy to work on with few EPA restrictions. Thanks
 
Seeing as I live in a fire prone area; the muffler baffles and spark screens are there to help prevent forest fires.

They are not there for any other reason. Yes it impacts performance to trap potential fire starters. Yes, it is an easy way to get a bit extra power by reducing exhaust restrictions.

I have a heavily modified saw that I usually do not run outside from May through October because I dont trust it not to send out a spark.

One really needs to think about why certain things are in place before you start removing them. Sure, performance gains are nice sometimes, othertimes you should have just gotten a larger saw to start with.

I could always toss a forestry/processor chain on a saw for faster cutting (eventually it will bite or kill me when luck runs out), but that does not make it a good idea if I am using it with no one around to take me to the hospital or not using it on a remote/mill where I am protected because I did not know any better.

People tend to jump into things where they think faster and more power is better.

Normally one would need a good reason to run skiptooth chains and be prepared for what can happen as they grab aggressively in hardwoods and knots. Good for grubbing chains when cutting out roots etc.

Know a few ex-fallers who grind down their old chains to make various skiptooth on Walkerized or Bakerized saws (yes I am in the pnw).

Most of the stuff I cut is fir, maple, apple, or plum, so I have never really needed a dedicated skiptooth myself.
 
I guess the more the saws get in emission controls the less power they will have?

In the firewood bizz time is money. With a slow saw we lose $$.
 
I guess the more the saws get in emission controls the less power they will have?
No, it's the fuel source that is the issue.

Look at what electric cars are putting put for wheel torque. Electric chainsaws are pretty pathetic currently, but they will not stay that way, electric race bikes are advancing quickly!
 
So we burn non ethanol fuel? But these newer saws aren’t like our older saws. There finicky to start when hot right?
 
So we burn non ethanol fuel? But these newer saws aren’t like our older saws. There finicky to start when hot right?
Miniaturization issues, outboard engines went through the same problems in the transition from 2 stroke to 4 stroke.
 
Seeing as I live in a fire prone area; the muffler baffles and spark screens are there to help prevent forest fires.They are not there for any other reason. Yes it impacts performance to trap potential fire starters. Yes, it is an easy way to get a bit extra power by reducing exhaust restrictions.

As far as the USFD you may do about anything you want as long as you have an approved spark arrester screen. I use dirt bike equipment often.

I have a heavily modified saw that I usually do not run outside from May through October because I dont trust it not to send out a spark.
One really needs to think about why certain things are in place before you start removing them. Sure, performance gains are nice sometimes, othertimes you should have just gotten a larger saw to start with.
I could always toss a forestry/processor chain on a saw for faster cutting (eventually it will bite or kill me when luck runs out), but that does not make it a good idea if I am using it with no one around to take me to the hospital or not using it on a remote/mill where I am protected because I did not know any better.

I use bigger saws with the most aggressive chains available and not bleed to death yet after more than 50 years of cutting.

People tend to jump into things where they think faster and more power is better.

Yes bigger is better in that I have five 100 cc plus saws and can not tolerate some thing that takes forever to get the job done.

Normally one would need a good reason to run skiptooth chains and be prepared for what can happen as they grab aggressively in hardwoods and knots. Good for grubbing chains when cutting out roots etc.

I cut 4' to 5' rounds often why would any one need skip tooth?

Know a few ex-fallers who grind down their old chains to make various skiptooth on Walkerized or Bakerized saws (yes I am in the pnw).

Most of the stuff I cut is fir, maple, apple, or plum, so I have never really needed a dedicated skiptooth myself.
 
All valid and informed comments!

Many people jump into things without knowing why. Sometimes it lands them in trouble.

As for your skiptooth question: the guys I know who use them, they only use them for grubbing chains when cutting through roots and dirt trying to pop stumps. Sometimes the excavators can not do it alone and need some help. Never witnessed them used on anything else yet.
 
My older Husqvarna saws kicked butt. I plugged the govenors and installed a 8 pin floating rim and drum in my 266se and 2100cd they became beasts. Even my little 240sg was a fast cutter with the same setup. No porting on my work saws. My shops saws were built for the fair. In the woods breaking them in was unbelievable.
Could you explain "plugged the governors"?

I've not ported the blocks but I gutted the mufflers and made verrrrry open air-intakes (filtered of course but way more capacity than OEM) and use 95oct Husqvarna canned fuel... On all 3 of my saws the air-intakes are crazy restrictive, the mufflers are too in fact each one had a cat and spark-arrest IIRC (lol at needing a catylitic converter for a 25cc chainsaw engine :p ), just opening those common bottlenecks & using premium (ie real alkylated) fuel seems to be all I need, along w/ a good tune of course because they all get thin/lean when you mod the intake/exhaust.

@CausticUC - Not using a spark-arrester when it is appropriate is a ****-move IMO, plain & simple. I live in FL though so it's not a concern thankfully!

No dogs needed on your 4218 Poulan pro, just get you a good LP semi chisel chain. Only mod I have done on one of those beside a good chain was to open up the exhaust port on the muffler some and flip the exhaust deflector over. After that a good tuning. I have experimented on the depth rackers some to get a good cut but not to go overboard to the point that it's too dangerous to use. Would not speed the time trying to get more power out of one of these if you plan on using it instead of the not lasting long and be scrap pile bound.

Steve
Well put!! I've got the 4218 for the ground and it doesn't get much use since I got a top-handle 32cc and put a 16" on it...when that guy dies I'm getting the 355t, when the 4218 dies I'm getting whatever 55-70cc, husq/echo/stihl I can that's used but good-looking (my pawn has warranties so if something looks good but failed I can still return it)

Have given up on the desire to port after getting more informed Re lithium units, I knew it'd be either 60 or 80V where power was no longer an issue (ie you could make the saw run with more power than was safe), seems 80V is enough to get near a 50cc petrol but whether it settles on 60 or 80v for "high-strength LiPo climb saws" I just hope I can get my gear to last til there's good offerings, otherwise that 355t seems a real great buy (in fact I can't understand why it's not priced more like $500, seems comparable to husq or stihl top-end offerings on paper and I've found almost zero negative reviews, also have seen comparisons of it holding its own w/ a 200 or 201(stock, I knonw a modded 200t can beat any modded 355t)
 
I agree.

Also the reason I have two sets of saws, though the ones for summer really dont see much use. But they are there when the lower level fire bans come on.
 
They happen, for sure, just not in FL (I'm sure you could find an outlier case if you really tried), it's simply too humid for a fire-fostering environment, there's ALWAYS the chance an errant spark finds an abandoned birds' nest and ignites it but in FL the chances are so low, relative-dangers so low (ie during main work-season it rains almost daily, "forest fire"/out-of-control-fire is inherently cut-off quick in summer here!

I guess as w/ everything one does, it's always that background/subconscious risk-versus-reward analysis we do and can tell you I've got zero reservations being firmly in the "let the sparks fly where they may" camp (in FL only of course)!!
 

Latest posts

Back
Top