• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl 064

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GoBigBlue1984

Right-wing conservative blue collar American
Joined
Oct 12, 2014
Messages
623
Reaction score
564
Location
Central Kentucky
Selling an 064 I bought from a gentleman on the west coast. Nice saw. Runs very well, oils like a champ. Initially, the plan was to swap the stock
cylinder for a ported 066 cylinder and hold on to it. A good friend in Oregon built me a 064/066 hybrid that’s pretty spectacular itself. So this one goes.

Original clutch cover and air filter were nice but I had brand new OEM so I swapped them.

Saw is all OEM best I can see aside from Caber’s.

I’ll offer this saw with a stock OEM cylinder PHO for $600 plus shipping from 42748.

Or I’ll swap out a ported KS non decomp jug. Base/band cut, uppers raised, exhaust widened, ignition advance for $700 plus shipping.

Or I’ll swap out a ported 066/660 top end. Base/band cut, uppers raised, exhaust widened, ignition advance for $760 plus shipping.

Any questions, please ask.
A49AFDC7-3A09-4EC3-B656-CA0F50DAE225.jpeg B813C27D-EB73-4E7C-B3B1-5125AD5623DE.jpeg628CB88A-E0B0-4F5E-886E-768CDFA8B656.jpeg 6D17745C-EC8D-4F05-886D-1993782CE5D2.jpeg

AFA92B9C-1DBC-4A7C-A7C5-50D0440C48CB.jpeg4CE0405B-6E8B-4170-B39A-932991FFD58F.jpeg509E01CA-C25A-48AD-9A31-D716D6C5C624.jpeg FC30B0BC-480A-4A32-AD6F-7F4D1A118441.jpeg
 
They are both OEM. I can pull muffler and cylinder if you’d like to see pictures of both the bore/piston of the 52mm top that’s on it now. First I’ll get you a compression reading.

I’ll also post pictures of the OEM top end I will swap out if you’d rather go that route.
 
They are both OEM. I can pull muffler and cylinder if you’d like to see pictures of both the bore/piston of the 52mm top that’s on it now. First I’ll get you a compression reading.

I’ll also post pictures of the OEM top end I will swap out if you’d rather go that route.

I'd like compression and pictures of the 064 for now. Thank you.
 

Latest posts

Back
Top