Long T27 Torx bit (for a rocket driver)

[Vintage Engine Repairs]

Posts I have read have old part numbers so doing another thread. Looking for a t27 torx to fit down along side the cylinder to release the bolts on an MS 260. Want it to fit into a socket so I can use a torque wrench with it. I don’t want the t- handle version! In Australia. Can’t find anything...

 

[HarleyT]

https://www.amazon.com/gp/offer-listing/B00B1T5JTG/ref=dp_olp_new_mbc?ie=UTF8&condition=new

 

[Vintage Engine Repairs]

https://www.amazon.com/gp/offer-listing/B00B1T5JTG/ref=dp_olp_new_mbc?ie=UTF8&condition=new

I’m reluctant to buy a cheap one from amazon like that because of the torque that will be applied along that long shaft, rather in this case buy branded thanks tho!

 

[Nathan Graff]

https://www.amazon.com/gp/offer-listing/B00B1T5JTG/ref=dp_olp_new_mbc?ie=UTF8&condition=new

It's the one I have. Works well.

 

[HarleyT]

Irwin is pretty good stuff, I have wiha, which is great.

I just looked up one to show you.

I can search more for you, since you don't have a computer....................

 

[HarleyT]

https://www.eio.com/products/wiha-7...iha 74590 T27 x 152mm Torx Power Bit | $10.41

 

[HarleyT]

Here is a damn good deal, you'll never wear these out!!

https://www.amazon.com/Irwin-93371-...0SFD01BMFR2&psc=1&refRID=FH1Z0E6V50SFD01BMFR2

 

[HarleyT]

https://www.ebay.com/itm/Wiha-74590...092895&hash=item23761359fd:g:L5oAAOSw851cQiIE

 

[DND 9000]

The original Stihl one:

0812 542 2104

 

[HarleyT]

Yeah, I like clicking it in my drill/driver.

I Don't use a torque wrench.....

 

[Bob Hedgecutter]

Aussies, long T27 Torx bit found..
Discussion in 'Chainsaw' started by tdi-rick, Aug 5, 2009.

 

[Canyon Angler]

I’m reluctant to buy a cheap one from amazon like that because of the torque that will be applied along that long shaft, rather in this case buy branded thanks tho!

I'm guessing it would take about 100 ft-lb to twist that shaft...how much torque you planning to apply?

I bought mine on ebay for like a buck delivered, then tig welded a 50¢ flea market socket to it.