WT194Pictures I don't know. What 3 screw carb should I get?
Thanks man. It the cutout for the oiler but doesn't have a screw there. So wt194 is adjustable high jet. The saw looks new wish it was mine.WT194
Around $40 on eBay. There are China knockoffs for around $10, but it’s a crapshoot.
There were multiple versions of this saw produced over 20+ years all called "026". Without photos etc. nobody knows exactly the configuration that you got.This a 026 if it matters.
Wt493.There were multiple versions of this saw produced over 20+ years all called "026". Without photos etc. nobody knows exactly the configuration that you got.
That hole is how you remove the top cover. I've got an 026. Good luckThat a look at this one, looks brand new. ? What is the little hole on cylinder cover use for. No decomposition valve and a fixed high jet. She's pretty.
Plus it's got a 20 bar.
Based on the photos a WT-194 will bolt right in. BTW, it looks like someone likely put the wrong carb screw grommet on the existing carb. As I recall the 026 grommets were black and the 260 were white. Also it doesn't look like the white one fits very good.Wt493.
What is the MD number on the silver label? It is not legible on the photo.I agree on the bar.i don't think any has been in here.the white grommet fits fine. No snorkel on the a/f. Yes for three screw carb and filter. Here's some pics
Well, based on that label this saw was manufactured in June of 1999, one of the last ones before the MS260 came out. The carb is likely original.Label
Enter your email address to join: