• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Poulan pro 655bp

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pwoller

ArboristSite Guru
Joined
Aug 17, 2009
Messages
808
Reaction score
235
Location
Indiana
Nice old Poulan pro 655. This one has the sdc carb and the boost port. I opened it up to see if it had the extra port and it did. Everything works as it should including the aux oiler. I just had my saw shop look it over and tune it so it’s ready to go cut. If you’ve never run one of these your missing out they flat out rip. Its reading 140lbs on my compression gauge but it feels like more then that to me. It does have a scuff on the piston but nothing that keeps it from running strong. I’d take 500 plus shipping for this one pho. Located in central Indiana.
 

Attachments

  • 05362895-F21F-410A-AF87-2663D788236E.jpeg
    05362895-F21F-410A-AF87-2663D788236E.jpeg
    1.7 MB · Views: 87
  • CB73B2BE-E12B-4295-847C-77A9160640AA.jpeg
    CB73B2BE-E12B-4295-847C-77A9160640AA.jpeg
    1.7 MB · Views: 79
  • A00E9672-5ABE-4995-AA89-9854E750D120.jpeg
    A00E9672-5ABE-4995-AA89-9854E750D120.jpeg
    1.9 MB · Views: 78
  • 370E59D8-2136-477C-8F45-0A38FF7FE091.jpeg
    370E59D8-2136-477C-8F45-0A38FF7FE091.jpeg
    2 MB · Views: 83
  • BF8E82B5-E108-4ADF-B494-250E66386601.jpeg
    BF8E82B5-E108-4ADF-B494-250E66386601.jpeg
    2 MB · Views: 77
  • 2FD371B4-D559-4430-B02C-797A714DF691.jpeg
    2FD371B4-D559-4430-B02C-797A714DF691.jpeg
    1.3 MB · Views: 77
  • D2EB5430-26FB-4343-91C2-837D65C78604.jpeg
    D2EB5430-26FB-4343-91C2-837D65C78604.jpeg
    2 MB · Views: 79
Piston pics
 

Attachments

  • 5009F5C0-9161-4F10-B836-BDF7AC492294.jpeg
    5009F5C0-9161-4F10-B836-BDF7AC492294.jpeg
    1.2 MB · Views: 50
  • FFF0226B-FFA1-45F3-8745-A32B21A447A2.jpeg
    FFF0226B-FFA1-45F3-8745-A32B21A447A2.jpeg
    2.5 MB · Views: 50
  • 4FF3C7E7-83CD-4D39-B520-12A8E06E6E62.jpeg
    4FF3C7E7-83CD-4D39-B520-12A8E06E6E62.jpeg
    1.2 MB · Views: 52
  • 5565705A-4C95-4C49-B303-D2A17D543CB9.jpeg
    5565705A-4C95-4C49-B303-D2A17D543CB9.jpeg
    2.7 MB · Views: 50
  • 77576B98-9455-4243-ACF3-590A716D2D98.jpeg
    77576B98-9455-4243-ACF3-590A716D2D98.jpeg
    1.2 MB · Views: 52
  • EFA86871-39BF-47E0-A2A2-F0CAA3A0A6FE.jpeg
    EFA86871-39BF-47E0-A2A2-F0CAA3A0A6FE.jpeg
    1.1 MB · Views: 53
There is a BP piston and non BP piston. I don't remember for sure, but that looks like the non BP piston. If I recall the BP piston is open below the pin boss area. Someone will correct me if I'm wrong.

It’s got the open window down to the skirt on the bp side and a closed window on the exhaust side. I believe it’s the correct piston for the bp cylinder.
 
pita, but would suggest a good jug [pics] will help your sale.
not like ya can go to the store n get another if need be...
There’s a picture above showing the bore of the cylinder. It makes good compression and runs the way it should.
 
Back
Top