• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Trade Sachs Dolmar 133 want to trade for husqvarna 372

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

amichealferrin

ArboristSite Lurker
Joined
Dec 2, 2019
Messages
46
Reaction score
8
Location
Soda Springs Idaho
I have a dolmar 133 PHO with good spark and clean piston/cylinder want to trade for husqvarna 272 or 372. Let me know if I am in left field. Thanks for looking

Tony
 
Do you have pics of the saw and the piston? I have a 372 I'm thinking about getting rid of and I might be interested in a trade.
Sorry I just started cleaning it up so it's really dirty I will get some more pics when I get all grime off.
 

Attachments

  • 1578198943065902966157.jpg
    1578198943065902966157.jpg
    1.7 MB · Views: 32
  • 1578199041194-587553935.jpg
    3.4 MB · Views: 12
  • 1578199403758460016213.jpg
    1578199403758460016213.jpg
    1.5 MB · Views: 32
  • 1578199510517927405335.jpg
    3.1 MB · Views: 13
Do you know if it is solid/complete or even if it runs or not? If it’s structurally sound and only needs a carb rebuild or something to run, I think we can work something out.
The cotter pin on choke lever to carb needs replaced, I closed it manually and I put fuel mix in carb and it fired off. The pull rope is shorter than normal. I have no experience with sachs but it feels solid and has way more compression than any other saw I have. I haven't had carb off to check. It is missing brake that was original. I would like to get it cleaned up a bit. I had a bugger of a time uploading pics could you send pics of your saw? Thanks

Tony
 
Here's some pics of the saw. In the last pic, the XPW recoil was just mocked up on the saw, the XP one in the bottom of the pic is the one that will be on the saw. Also, the saw has a chinese top end on it that will be swapped out for an oem non-Xtorq top end.
UNADJUSTEDNONRAW_thumb_132a6.jpg UNADJUSTEDNONRAW_thumb_132a5.jpg IMG_4751.JPG IMG_4752.JPG
7KkicXHxQbCh6wiSZu5Ggw_thumb_132c8.jpg
 
Here's some pics of the saw. In the last pic, the XPW recoil was just mocked up on the saw, the XP one in the bottom of the pic is the one that will be on the saw. Also, the saw has a chinese top end on it that will be swapped out for an oem non-Xtorq top end.
View attachment 785663 View attachment 785664 View attachment 785665 View attachment 785666
View attachment 785667
So it will have original or Chinese piston and cylinder? I am a little confused.
That looks really nice btw
Sorry it's so late

Thanks

Tony
 
Back
Top