• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Husqvarna 372 OE SOLD!!!!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

brandonstc6

Addicted to ArboristSite
Joined
Sep 28, 2015
Messages
3,315
Reaction score
2,798
Location
Mississippi
Husqvarna 372xp. I rebuilt this saw.
New oem:
Intake boot
Seals
Gaskets
Air filter
Full wrap handle
Spikes
Decomp valve

Non oem parts:
Nachi C3 bearings (made in Japan)
Meteor piston
Aftermarket muffler
Aftermarket carburetor (oem carburetor is included.)
Aftermarket clutch cover

Saw has a little burnt place in the top cover from a poorly modded muffler. Saw start right up and runs. Once you put it in wood it speeds up on it’s on in the cut, otherwise it runs pretty good. I’m not sure what’s going on. Oem carburetor worked at first but then saw wouldn’t run until I put the aftermarket carburetor on it. Saw has not been run enough for rings to seat. Saw will need broken in and the issue of engine speed picking up fixed. Saw has the tensioner in the case instead of the clutch cover. Cylinder had no scoring at all and the plating looked great. I’ve spent a lot of time on this saw and I’m ready to move on to something else. All machining marks still on piston. I’ve run maybe 1/2 a tank through it. $275 plus shipping.
Add 3% if paying PayPal goods and services.
77e3a446f19ce0367989e120c89035bf.jpg
8dcccb42f9350c28a3744e55b4926fd9.jpg
32fff66c631b2ff8ac1909018b303784.jpg
6a26426bec9b40bb8b63ed4ea5121762.jpg
2bd98e5639b1f68ea73737e53bed05bd.jpg
fe6b69515115ca189986350cda93b751.jpg
969146575c3a0727e1adbad2c1cb17de.jpg




Sent from my iPhone using Tapatalk
 
Back
Top