• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold 550 MKI

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Lionsfan

Addicted to ArboristSite
AS Supporting Member.
Joined
Aug 11, 2019
Messages
1,775
Reaction score
11,367
Location
Cheboygan, MI
2018 model 550MKI. Bout a dozen tanks through it, so not even broke in yet. Nice little saw, just not for me. Interested in trading for 3-series, runners or builders. If interested, shoot me a pm.
 

Attachments

  • 20200316_140843.jpg
    20200316_140843.jpg
    1.5 MB · Views: 56
  • 20200316_140900.jpg
    20200316_140900.jpg
    1.5 MB · Views: 57
  • 20200316_140929.jpg
    20200316_140929.jpg
    1.7 MB · Views: 54
Hi, I have a nice 359 I purchased from a reputable member here a few weeks back. I opened up the inlets to the transfer ports (these were heavily restricted from the factory). Mod’d that awful calalytic muffler. Advanced the timing a bit and deleted the base gasket (0.024” squish now). The saw runs awesome now.
I also replaced the crappy plastic intake clamp with the OEM stainless steel clamp.
PM me if any interest.
Thx.
Nick
 

Attachments

  • D5C18555-9F6F-4AAB-B126-502BF02128FC.jpeg
    D5C18555-9F6F-4AAB-B126-502BF02128FC.jpeg
    2.3 MB · Views: 21
  • 037C185A-79EA-49CB-B94A-F726E7ACD05A.jpeg
    037C185A-79EA-49CB-B94A-F726E7ACD05A.jpeg
    2 MB · Views: 20
  • 10538AEC-CAFB-46AB-8388-F4E295C6C7A0.jpeg
    10538AEC-CAFB-46AB-8388-F4E295C6C7A0.jpeg
    2.1 MB · Views: 18
Maybe this one will be better, first one didn’t load right on my phone4A83951C-9054-4FF7-BD64-3AB7368EB774.jpeg
 
Hi, I have a nice 359 I purchased from a reputable member here a few weeks back. I opened up the inlets to the transfer ports (these were heavily restricted from the factory). Mod’d that awful calalytic muffler. Advanced the timing a bit and deleted the base gasket (0.024” squish now). The saw runs awesome now.
I also replaced the crappy plastic intake clamp with the OEM stainless steel clamp.
PM me if any interest.
Thx.
Nick


Nice looking saw, but I'm going to pass.
 
Back
Top