• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Duce Built 372XT

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chipper1

Living Life to the Full
AS Supporting Member.
Joined
Nov 5, 2014
Messages
44,900
Reaction score
307,581
Location
GR. MI.
Great running saw that runs like the fresh build it is.
I've ran a few tanks thru this one and she pulls great, sure to get stronger as it gets broke in.
It has a 390/wide clutch cover and does a great job moving chips. If I'm not mistaken the chassis is a 2018 and it had new bearings installed when built.
It has an unlimited coil and is very easy to tune.
The muffler has some small cracks around the tubes where the bolts go, but it's very solid. The muffler has also been opened up under the deflector.
I'll see if I can find the original thread, @Duce remember this one?
$425 plus shipping net to me for the powerhead, PayPal preferred.
Here'a a video of it running in seasoned ash(very hard) with a 24", it will pull just like this on a 24" green red oak log as an example of how hard it is.
 
Yes I do. OEM p/c take off only test run. SKF bearings, new lines filter, nice OEM clutch, gaskets and seals. Should run a long time with proper care. GLWS.
Thanks, maybe that was one of the cylinders you got from me?
I have another here if you need it, and a line on another too, as well a couple 346 nib and a 390 sitting her just in case :).
 
What about the chain saw relief act? Should be coming soon.
It's currently happening right now, I'm trying to relieve some of the saws I have lol.
I'm heading out now to do some cutting, getting firewood for 21/22 in the woodshed from the woods, might as well since the weather is good right now and the mosquitoes aren't biting, that wont last long.
 
Back
Top