Asplundh Whisper Chipper Replacement Parts

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Removing rusty blade adjusting bolts on the JEY

HI does any one know how to remove rusty blade adjusting bolts out of a jey 12" chipper?

After removing the knife and the wedge from the adjacent knife well, the opposite end of the ajustment screw takes a much larger allen wrench, which you can apply alot more torque to. Clean it out the wood chip dust & junk, let it soak with PB Blaster and go for it. You should be able to get it to loosen up.

Search on JEY manual - I posted the pages for replacing and adjusting the knives, which includes some nice original drawings from Asplundh
 
Help 16 inch whisper chipper flywheel

My whisper chipper is eating starters. My local guy rebuilds them but now they arent lasting longer than two weeks. I need to find a flywheel for it. Any ideas? Thanks
 
chris........saw a couple videos on replacing bearings and it looks way beyond my competence level....so...couple questions pls if you've time. Don't know which model we have as it's so covered with old paint and such. 8cyl engine, chipper has a 20" long drum w/ a 15" diameter, 3" shaft....but it looks like the old JEY whisper chipper.... Can I still get bearings for it from Altec and do you know anybody in the Bangor, Maine area that can work on these marvelous old monsters? Thx....gordy [email protected]
 
Anyone know where I can find a new or used Hoof governor for a Ford V8 gas whisper chipper? Or someone capable of rebuilding one? Numbers on governor are BD533 R and C4JZ-12450-D. Thanks
 

Attachments

  • 5D44024B-17DD-405D-8BFD-7D42CFC01BC7.jpeg
    5D44024B-17DD-405D-8BFD-7D42CFC01BC7.jpeg
    1.2 MB · Views: 8
  • B49F004D-0794-4983-8A6E-C3BA9A5C9D21.jpeg
    B49F004D-0794-4983-8A6E-C3BA9A5C9D21.jpeg
    821.3 KB · Views: 8

Latest posts

Back
Top