McCulloch Chain Saws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
An AS question, I just discovered that my phone ignored Pogo’s last post. I don’t know how that happened and I don’t know how to undo it. There used to be an ignore button which I used years ago when things were going sideways on AS but I never used it for anyone in this thread.
Ron
 
Thanks mate...the hole is so small on the impulse port, its hard to know 100% whether its lined up properly....i'll get the carb leak sorted, wait for the cork gasket / new fuel line to arrive and then i'll see if she runs properly...getting closer to having it done, it's frustrating but that's how you learn...but least the ignition side seems good.

On a side note: you guys seen the youtube channel Buckin Billy Ray Smith? I stumbled onto his channel which was mainly tree felling but that guy has a rather large collection of old McCulloch saws.
 
An AS question, I just discovered that my phone ignored Pogo’s last post. I don’t know how that happened and I don’t know how to undo it. There used to be an ignore button which I used years ago when things were going sideways on AS but I never used it for anyone in this thread.
Ron
Click on his name, it'll show a popup/info bubble, there will be an "ignore" or "unignore" button. Click on it so it says "ignore" and you're good.
Image 2-18-21 at 5.22 PM.jpeg
 
Thanks mate...the hole is so small on the impulse port, its hard to know 100% whether its lined up properly....i'll get the carb leak sorted, wait for the cork gasket / new fuel line to arrive and then i'll see if she runs properly...getting closer to having it done, it's frustrating but that's how you learn...but least the ignition side seems good.

On a side note: you guys seen the youtube channel Buckin Billy Ray Smith? I stumbled onto his channel which was mainly tree felling but that guy has a rather large collection of old McCulloch saws.
Yeah for a fellow who doesn't have to work for a living he's got quite an expensive collection.
 
An AS question, I just discovered that my phone ignored Pogo’s last post. I don’t know how that happened and I don’t know how to undo it.
There seem to be several problems with AS functions recently -- not the least of which are notification issues again. I haven't received a notice of new messages for any threads since the 14th. My notifications preferences are still checked but the page is blanked out. Probably from another 'upgrade'.
 
Rather a tough week for us, Mrs. Heimann was admitted to the hospital on Monday with stomach pain, turned out to be pancreatitis. While struggling through that she's had heart rhythm problems, fluid building up around her heart and lungs, and breathing issues... Things seem to be on the mend now but she won't be coming home until Sunday or Monday.

I'll do my best to check in from time to time and help out if I can. Looks like you've been doing a good job without me.

This has come up on another site and via private mail here. Some info on saws sold down under.

macbrocure4aa.jpg
macbrocure_aa.jpg
Macbrocure2aa.jpg

Mark
 
Rather a tough week for us, Mrs. Heimann was admitted to the hospital on Monday with stomach pain, turned out to be pancreatitis. While struggling through that she's had heart rhythm problems, fluid building up around her heart and lungs, and breathing issues... Things seem to be on the mend now but she won't be coming home until Sunday or Monday.

I'll do my best to check in from time to time and help out if I can. Looks like you've been doing a good job without me.

This has come up on another site and via private mail here. Some info on saws sold down under.

View attachment 890740
View attachment 890738
View attachment 890739

Mark

Dang 118cc 12 HP. That seems crazy high since the 3120 says it has 8.7


Sent from my iPhone using Tapatalk
 
Rather a tough week for us, Mrs. Heimann was admitted to the hospital on Monday with stomach pain, turned out to be pancreatitis. While struggling through that she's had heart rhythm problems, fluid building up around her heart and lungs, and breathing issues... Things seem to be on the mend now but she won't be coming home until Sunday or Monday.

I'll do my best to check in from time to time and help out if I can. Looks like you've been doing a good job without me.

This has come up on another site and via private mail here. Some info on saws sold down under.

View attachment 890740
View attachment 890738
View attachment 890739

Mark
Wishing your wife a speedy recovery.
 
Dang 118cc 12 HP. That seems crazy high since the 3120 says it has 8.7


Sent from my iPhone using Tapatalk
Rather a tough week for us, Mrs. Heimann was admitted to the hospital on Monday with stomach pain, turned out to be pancreatitis. While struggling through that she's had heart rhythm problems, fluid building up around her heart and lungs, and breathing issues... Things seem to be on the mend now but she won't be coming home until Sunday or Monday.

I'll do my best to check in from time to time and help out if I can. Looks like you've been doing a good job without me.

This has come up on another site and via private mail here. Some info on saws sold down under.

View attachment 890740
View attachment 890738
View attachment 890739

Mark
Mark
First time I've been on AS in years. Having to learn this all over again.
I'm very sorry to hear about your wife.
I hope she recovers completely and soon, and best wishes for your family.
All my best.
Marty
 
Back
Top