Will a 395xp cylinder fit a 394xp?

[watsonr]

Well I decided to check the squish and then reassemble the saw as it was minus the gasket. I am now at 168-170psi and everything looks to be good to go. I'll test run it this weekend and see how it goes. Unfortunately I did purchase a used jug on ebay before I realized my cylinder was good, so I guess I'll sell that one.

Even with no base gasket my squish is still at .034 so very safe, could really use the base milled. But we will see maybe one day I'll send it out to one of the porting experts to get massaged one day. This saw is rough cosmetically, but seems to be fairly low hours so I think I will be keeping it for milling larger logs my BSM cannot handle.

Thanks for all the help guys.

Send the used jug you bought to Randy and then swap them out when he's done.

 

[excess650]

Send the used jug you bought to Randy and then swap them out when he's done.

If you decide to do this, check the squish first, and then send that number along.