Dolmar 111 fastner issue

[bentbarkbuster]

I have a Dolmar 111 that I am replacing all the oiler hoses on, mainly because the lower one was leaking around the hose to tank seal. I am having an issue trying to remove the fastener that holds the inner ware plate on so I can replace the upper hose. I believe I don't have the hose pushed in enough because the new upper hose is really pouring oil out of that area. This fastener looks line a round rivet head with no slots or center hex to remove it. The same style fastener is holding the outer ware plate on the clutch cover. So my question is, how do you guys remove this fastener? Here is a few pics of the fastener. Thanks.

 

[bentbarkbuster]

Bump.

 

[pioneerguy600]

They just pry out, get a sharp edge under the head and it will pry out easily enough.

 

[bentbarkbuster]

I tried everything except for that. I got it out. Thanks for your reply.