Hybrid Build

[Adirondackstihl]

Do you have the updated clutch cover to go with them ? The older ones are not drilled for those studs ,you may have to do a how to in this thread if not machined for them .

The AM clutch cover appears to be counterbored...

 

[KG441c]

Loctite 518. What # anaerobic is that Jeremy

 

[Adirondackstihl]

Loctite 518. What # anaerobic is that Jeremy

Same as 518
It's 51813

 

[Mtthwvn]

That's what I always use. I like it a lot, but gosh it's expensive

 

[Stihlofadeal64]

That's what I always use. I like it a lot, but gosh it's expensive

I believe the last Anaerobic sealant like that I bought was cheaper than the Locktite stuff. Works the same I believe, is that what you wanted to discuss sir? I've used quite a bit of both tubes on various repairs. Both are good products and I suppose both have their "better applications."

 

[Adirondackstihl]

I used the 518 once.
Thought it too messy.
Never used it again.
I gave my tube to Phil. Needless to say, I ended up with the tube back in my toolbox.

 

[Mastermind]

Too messy?

Good Lord......

 

[KG441c]

Too messy?

Good Lord......

I like 518 better than motoseal or yamabond 4

 

[Adirondackstihl]

Okay
Well I won't lie to ya'll.
I got a dab of it (accidentally) on the skirt of a piston when putting the jug back on an EFCO 952.
Came back the next day and the 518 had glued the piston to the cylinder wall.

 

[Mastermind]

Okay
Well I won't lie to ya'll.
I got a dab of it (accidentally) on the skirt of a piston when putting the jug back on an EFCO 952.
Came back the next day and the 518 had glued the piston to the cylinder wall.

You can't make stuff like that up.

 

[KG441c]

Okay
Well I won't lie to ya'll.
I got a dab of it (accidentally) on the skirt of a piston when putting the jug back on an EFCO 952.
Came back the next day and the 518 had glued the piston to the cylinder wall.

 

[Mtthwvn]

So your using 51813...is this still a anaerobic sealant? I've never heard of it before, just thought their was 518 and 515

 

[KG441c]

So your using 51813...is this still a anaerobic sealant? I've never heard of it before, just thought their was 518 and 515

Will 515 work also on a cylinder?

 

[Definitive Dave]

I love the 518, but had a request for this other stuff recently.

 

[Adirondackstihl]

Permatex 51813 is the same identical stuff as Loctite 518.

 

[Mastermind]

 

[Mastermind]

This stuff tastes fantastic....

 

[Adirondackstihl]

This stuff tastes fantastic....

Can you make wine with it?

 

[Mastermind]

I've made wine outta everything from honeysuckle to watermelon rine. But, I draw the line on this.

Sorry.

 

[blsnelling]

Snellings hybrid is pretty impressive.

Thanks Joe. I've become a 372 snob, but my hybrid is as strong as most any 372 or 461. The key to a strong hybrid is very short blowdown, long intake, and timing advance.



The hybrid starts at 2:10