Raffle For AS Member "hoskvarna"

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I'll be donating. Wish I were closer Mark. I could bring compressors, Paslode Framemaster guns, enough gun 16's/8's to frame you a shop twice, enough air hose to reach a few hundred feet, step ladders, extension ladders, etc, etc.
Goin steel frame this time. Got one ordered b here in March.


From the Hills
 
1. New MS461R ported by Mastermind/28'' total super bar w/2 chains (many members, Mastermind and tlandrum)
2. Husqvarna s2800 splitting ax (tlandrum)
3. Free woods port (Miller Mod Saws)
4. Two - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
5. Service to dress a bar (SquareFile)
6. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder)
7. Brand new fiskars x25 axe. (sawmikaze)
8. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adironackstihl)
9. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
10. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
11. Free saw porting job. (jmssaws)
12. Stihl 056 AV powerhead only. (Gary Courtney)
13. Wilton Bash 6# Splitting Maul (svk)
14. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)



CLICK HERE TO DONATE
 
Just sent in $30. Wish I could help more. Canadian dollar is in the crapper right now. But this is no place to complain about such a minor inconvenience.

My mom also wanted to help out, so thats another 10 bucks added to a great cause

Best wishes to you @hoskvarna

Ha! We need a vid if your mom wins a saw!
 
I'd like to offer my service to dress a bar as in the pics. If someone wants it, the bar has to have a removable sprocket for machining or solid nose. Cannot be any longer than 36" from tip to tip. If the bar is in excellent condition I've found it only takes .003 to .005 off per side.
20160125_181455.jpg 20160125_190414.jpg 20160125_183348.jpg
 
I'd like to offer my service to dress a bar as in the pics. If someone wants it, the bar has to have a removable sprocket for machining or solid nose. Cannot be any longer than 36" from tip to tip. If the bar is in excellent condition I've found it only takes .003 to .005 off per side.
View attachment 482689

PM inbound.
 
1. New MS461R ported by Mastermind/28'' total super bar w/2 chains (many members, Mastermind and tlandrum)
2. Husqvarna s2800 splitting ax (tlandrum)
3. Free woods port (Miller Mod Saws)
4. Two - New Stihl chains of 3/8 .050 full skip square, winner names the DL (Deets)
5. Service to dress a bar (SquareFile)
6. A porters starting kit! Foredom porting hand pieces, bits (paragonbuilder)
7. Brand new fiskars x25 axe. (sawmikaze)
8. Restored Stihl 028 WB New seals, all new rubber, rebuilt carb, new Meteor piston new OEM parts. (Adironackstihl)
9. Master service manual flashdrive. jonsered and arctic cat, new stihl training programs (backhoelover)
10. Francital Cervin, brand new Stretch Chainsaw Safety Trousers, size 34 (us) I think. (CapitaineHaddoc)
11. Free saw porting job. (jmssaws)
12. Stihl 056 AV powerhead only. (Gary Courtney)
13. Wilton Bash 6# Splitting Maul (svk)
14. Lightly used D009 pattern Oregon Bar 18"/.058/68DL with a loop of Carlton Semi Chisel chain (svk)



CLICK HERE TO DONATE
Thank you for tallying things up. Looking good.
 
6f1826290403376e654ea198864f95a7.jpg
d45d534782c4eaaf62c9f3e966a79d09.jpg
. That fire was hot when it does that.


From the Hills
 
Back
Top