Raffle for AS Member "Tree Monkey" - 30+ prizes worth over $6,000!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thread is Worthless Without Pics?

Not totally, but hard to tell a pork shoulder from a ported saw; or a chain grinder from a super scraper, let alone allowing participants to salivate over saws in addition to meat prizes. I propose asking prize contributors to post photos of the items that they are offering, to generate a little more buzz.

I'll start:

MSA Full brim safety helmet, with ratchet suspension, attached hearing muffs, and detachable, mesh, face shield. Shipped in the continental USA.

IMG_4985.jpg
IMG_4983.jpg
IMG_4984.jpg

(Empty STIHL bar and chain oil carton not included - this is a raffle donation, not an estate sale!)

Philbert
 
...everyone would be asking about the STIHL bar and chain oil case...

True... it's like being at a farm equipment sale. You'll see a guy with an ancient grain truck full of really nice stuff priced at half what it's worth, but everyone will be trying to get him to sell parts off of the truck!
 
We're close to $5000, folks! Let's kick it up a notch!!

Here's your Saturday list update!

1. Mastermind ported MS660 - from @Mastermind
2. Super pretty stock Jonsered 2083II - from @lwhaples
3. Oregon 520 chain grinder NIB - from @Definitive Dave
4. 25 Treemonkey shirts (Assuming these will be 25 separate door prizes) - from @Scott0154
5. 1 fully cooked Smoked Beef Brisket W/homemade sauce & next day air shipping (Feeds 18-20 winner supply's the side fixins of their choice} From @riverrat2 & Wife Suzanne
6. Stihl 026, previously owned by Chity Avitar(RIP) from @dieselfitter.
7. Ducks Unlimited special edition buck knife and sheath from Black River Trading Company- from @svk
8. 100ft roll of Oregon 72LGX chain from the crew at Boyd's Outdoor Power
9. 40" L x 30-42" Stihl chaps from @David Young
10. 10# of Burnett dairy cheese of your choosing (or if you don't know what to get, we'll pick some good stuff for ya), delivered to your door- from the Dodgegeeks
11. Smoked pork shoulder prepared and FedEx'd to your door from @quietfly!
12. 262xp donated by @Onan18, and ported by @jmssaws
13. Lightly Used Stihl Rollomatic ES 25" Guide Bar c/w 2 used but never sharpened 84DL 33RS chains from @GCJenks204
14. Stihl Hoody & Mug (will wait until a winner is selected to order the Hoody to get the right size), style may not be exactly as shown but of equal value from @GCJenks204
15. Bench mounted chainsaw vice from @Mycamaro_68
16. New Holland XL jacket (shipping from UK paid by donor) from @ajschainsaws
17. 288XP donated by Mike Smith/Smith Equipment Repair, Monroe GA. Rebuilt by @Onan18 and ported by @Mastermind (Parts donated by @Spike60 @Onan18 and Hills Ace Hardware and Outdoor Power)
18. Quart of Klotz KL-200 original techniplate oil from Cut4fun
19. Stihl 046 case crank fully powdered and new bearings and good crank shaft ready to add top end and oil pump from @Glock37
20. a 100' roll of Oregon chain from the site owner HL Supply
21. Dolmar branded,3/8 .050 20" small mount Husky Laminated Oregon bar (with half a tank on it) from @exSW
22. 25" 404 .063 stihl mount bar and chain from @psuiewalsh
23. 5/8" Super Scraper (perfect size for saw work) @Black Dog Chainsaw
24. 10 chains a sharpened, 4 to 6 gun blued bars... (Anyone else saying that to the time of the 12 days of Christmas? Bet you are now...) [/USER=534]@S Tebo[/USER]
25. New Spencer Logger’s Tape Model 950DC from [/USER=395]@Greenthorn[/USER]
26. MSA Full brim safety helmet from Philbert
27. $50 towards your purchase at Kunz woodworking.

GoFundMe - www.gofundme.com/t3vu6cd3
 
Just so y'all know... I may have been away here and there, but I AM keeping the master list of stuff, and throwing it out across all 3 sites.... There's enough folks who are only in one place, out are banned from others, so I'm just trying to get the biggest bang for the buck.

Now. If only everyone wouldn't realize that and donate at each thread....
[emoji12]
 
It's seems we've lost some momentum[emoji26]

Come on, folks! We're $85 short of $5000!!

Here's your latest list update!

1. Mastermind ported MS660 - from @Mastermind
2. Super pretty stock Jonsered 2083II - from @lwhaples
3. Oregon 520 chain grinder NIB - from @Definitive Dave
4. 25 Treemonkey shirts (Assuming these will be 25 separate door prizes) - from @Scott0154
5. 1 fully cooked Smoked Beef Brisket W/homemade sauce & next day air shipping (Feeds 18-20 winner supply's the side fixins of their choice} From @riverrat2 & Wife Suzanne
6. Stihl 026, previously owned by Chity Avitar(RIP) from @dieselfitter.
7. Ducks Unlimited special edition buck knife and sheath from Black River Trading Company- from @svk
8. 100ft roll of Oregon 72LGX chain from the crew at Boyd's Outdoor Power
9. 40" L x 30-42" Stihl chaps from @David Young
10. 10# of Burnett dairy cheese of your choosing (or if you don't know what to get, we'll pick some good stuff for ya), delivered to your door- from the Dodgegeeks
11. Smoked pork shoulder prepared and FedEx'd to your door from @quietfly!
12. 262xp donated by @Onan18, and ported by @jmssaws
13. Lightly Used Stihl Rollomatic ES 25" Guide Bar c/w 2 used but never sharpened 84DL 33RS chains from @GCJenks204
14. Stihl Hoody & Mug (will wait until a winner is selected to order the Hoody to get the right size), style may not be exactly as shown but of equal value from @GCJenks204
15. Bench mounted chainsaw vice from @Mycamaro_68
16. New Holland XL jacket (shipping from UK paid by donor) from @ajschainsaws
17. 288XP donated by Mike Smith/Smith Equipment Repair, Monroe GA. Rebuilt by @Onan18 and ported by @Mastermind (Parts donated by @Spike60 @Onan18 and Hills Ace Hardware and Outdoor Power)
18. Quart of Klotz KL-200 original techniplate oil from Cut4fun
19. Stihl 046 case crank fully powdered and new bearings and good crank shaft ready to add top end and oil pump from @Glock37
20. a 100' roll of Oregon chain from the site owner HL Supply
21. Dolmar branded,3/8 .050 20" small mount Husky Laminated Oregon bar (with half a tank on it) from @exSW
22. 25" 404 .063 stihl mount bar and chain from @psuiewalsh
23. 5/8" Super Scraper (perfect size for saw work) @Black Dog Chainsaw
24. 10 chains a sharpened, 4 to 6 gun blued bars... (Anyone else saying that to the time of the 12 days of Christmas? Bet you are now...) [/USER=534]@S Tebo[/USER]
25. New Spencer Logger’s Tape Model 950DC from [/USER=395]@Greenthorn[/USER]
26. MSA Full brim safety helmet from Philbert
27. $50 towards your purchase at Kunz woodworking.
28. one case of Amsoil Saber 3.5oz. bottles (I mix with 1.1 gal. of fuel for 40:1) shipp to the lower 48. From jk14
29. Handmade butcher block. From Nuno (can you please post a pic, Nuno?)

GoFundMe - www.gofundme.com/t3vu6cd3
 
It's seems we've lost some momentum [emoji26]

Come on, folks! We just finally hit $6000!!

Here's your latest list update!

1. Mastermind ported MS660 - from @Mastermind
2. Super pretty stock Jonsered 2083II - from @lwhaples
3. Oregon 520 chain grinder NIB - from @Definitive Dave
4. 25 Treemonkey shirts (Assuming these will be 25 separate door prizes) - from @Scott0154
5. 1 fully cooked Smoked Beef Brisket W/homemade sauce & next day air shipping (Feeds 18-20 winner supply's the side fixins of their choice} From @riverrat2 & Wife Suzanne
6. Stihl 026, previously owned by Chity Avitar(RIP) from @dieselfitter.
7. Ducks Unlimited special edition buck knife and sheath from Black River Trading Company- from @svk
8. 100ft roll of Oregon 72LGX chain from the crew at Boyd's Outdoor Power
9. 40" L x 30-42" Stihl chaps from @David Young
10. 10# of Burnett dairy cheese of your choosing (or if you don't know what to get, we'll pick some good stuff for ya), delivered to your door- from the Dodgegeeks
11. Smoked pork shoulder prepared and FedEx'd to your door from @quietfly!
12. 262xp donated by @Onan18, and ported by @jmssaws
13. Lightly Used Stihl Rollomatic ES 25" Guide Bar c/w 2 used but never sharpened 84DL 33RS chains from @GCJenks204
14. Stihl Hoody & Mug (will wait until a winner is selected to order the Hoody to get the right size), style may not be exactly as shown but of equal value from @GCJenks204
15. Bench mounted chainsaw vice from @Mycamaro_68
16. New Holland XL jacket (shipping from UK paid by donor) from @ajschainsaws
17. 288XP donated by Mike Smith/Smith Equipment Repair, Monroe GA. Rebuilt by @Onan18 and ported by @Mastermind (Parts donated by @Spike60 @Onan18 and Hills Ace Hardware and Outdoor Power)
18. Quart of Klotz KL-200 original techniplate oil from Cut4fun
19. Stihl 046 case crank fully powdered and new bearings and good crank shaft ready to add top end and oil pump from @Glock37
20. a 100' roll of Oregon chain from the site owner HL Supply
21. Dolmar branded,3/8 .050 20" small mount Husky Laminated Oregon bar (with half a tank on it) from @exSW
22. 25" 404 .063 stihl mount bar and chain from @psuiewalsh
23. 5/8" Super Scraper (perfect size for saw work) @Black Dog Chainsaw
24. 10 chains a sharpened, 4 to 6 gun blued bars... (Anyone else saying that to the time of the 12 days of Christmas? Bet you are now...)@S Tebo
25. New Spencer Logger’s Tape Model 950DC from @Greenthorn
26. MSA Full brim safety helmet from Philbert
27. $50 towards your in store purchase at Kunz woodworking.
28. one case of Amsoil Saber 3.5oz. bottles (I mix with 1.1 gal. of fuel for 40:1) shipp to the lower 48. From jk14
29. Handmade butcher block. From Nuno (can you please post a pic, Nuno?)

GoFundMe - www.gofundme.com/t3vu6cd3
 
Back
Top