Identify this 064 ignition

[Baddboyy21]

Can anyone tell me which part number this ignition is? I need to replace it.

 

[gunnusmc03]

It's the limited coil. Toss that in the trash. Convert to the unlimited version and never look back.

 

[blsnelling]

+1

 

[Baddboyy21]

It's the limited coil. Toss that in the trash. Convert to the unlimited version and never look back.

What part number do I need for the unlimited coil? Do I need a different flywheel?

 

[Jacob J.]

What part number do I need for the unlimited coil? Do I need a different flywheel?

It depends on which flywheel you have. The 1122 400 1203 flywheel usually has dual slots to run either the limited (1122 400 1303) coil or the non-limited versions (0000 400 1300 or 1122 400 1300). Also, post a picture of the coil mounts in your crankcase. The 1122 400 1300 and 0000 400 1300 coils have the same timing but use different coil mounts.

If you have the 1122 400 1204 flywheel then you're stuck with the limited coil, which isn't necessarily a bad thing on a stock saw. The coil you have pictured is the 1122 400 1303.

 

[Baddboyy21]

It depends on which flywheel you have. The 1122 400 1203 flywheel usually has dual slots to run either the limited (1122 400 1303) coil or the non-limited versions (0000 400 1300 or 1122 400 1300). Also, post a picture of the coil mounts in your crankcase. The 1122 400 1300 and 0000 400 1300 coils have the same timing but use different coil mounts.

If you have the 1122 400 1204 flywheel then you're stuck with the limited coil, which isn't necessarily a bad thing on a stock saw. The coil you have pictured is the 1122 400 1303.

I'll take a few pics tomorrow. I don't mind replacing it with same coil if I could find one.

 

[Ozhoo]

 

[Baddboyy21]

View attachment 519889

So if I have the 1122 400 1203 flywheel I can use any of next two ignitions?

 

[gunnusmc03]

If it has two keyways you can use either. Some 1203s have a single keyway and those only work with the limited coil.