the all aussie dribble thread!

[bennn*e]

Hi Fellas
Anyone tried the Stihl FL Depth Gauge?
http://www.stihl.com.au/STIHL-Products/Accessories/Chainsaw-Accessories/267816-1649/File-gauges.aspx

Yep got them in all pitches. They work well

 

[Emu Creek]

Yep got them in all pitches. They work well
Cheers for that. Might get a couple to see how they compare with the File-O-Plate.

 

[KiwiBro]

bobL method, i found 3° works best for what i do and it allways cuts like new

Wow. Just 3°? Did you find it too grabby beyond that? Apart from extremely dense, dead gums, I'm somewhere between 6° and 8°. Even in the aforementioned hard going wood, it's still about 5-6°

 

[2strokenut]

Wow. Just 3°? Did you find it too grabby beyond that? Apart from extremely dense, dead gums, I'm somewhere between 6° and 8°. Even in the aforementioned hard going wood, it's still about 5-6°

i only cut old dense dry as hell gums.

 

[KiwiBro]

What happens above 3°? Too grabby?

 

[splitpost]

Ha got my augers back ,didn't use them by the looks,any way here's some pics

Sent from my SM-N910G using Tapatalk

 

[2strokenut]

What happens above 3°? Too grabby?

bogs my saw down so cuts slower if i gave it a port job and a muf mod all would be good but just can not be bother at the moment and to much stuff to do.

 

[splitpost]

Cut my first thread since 92,bit rough but does the job

Sent from my SM-N910G using Tapatalk

 

[peter92]

Ha got my augers back ,didn't use them by the looks,any way here's some pics
thanks for the pics , now that would dig

Sent from my SM-N910G using Tapatalk

 

[TEZZA]

Wanting a copy of the Stihl Mediacat CD.

 

[derwoodii]

oh goody on its way... Bushnell Elite Tactical ERS 6-24x50 BTR-MIL Illuminated $1045 i got big scope envy today when looked down a few at club today so just blew some dosh to make me happy..

 

[peter92]

Wanting a copy of the Stihl Mediacat CD.

Check your email
Peter

 

[Rudolf73]

Cut my first thread since 92,bit rough but does the job

Sent from my SM-N910G using Tapatalk

Looks good! Cant beat having a lathe

 

[splitpost]

Looks good! Cant beat having a lathe

Too right Rudy,finally picked one up at the right price,done hardly any work

Sent from my SM-N910G using Tapatalk

 

[Rudolf73]

Too right Rudy,finally picked one up at the right price,done hardly any work

Sent from my SM-N910G using Tapatalk

I was looking at one of those in town the other day, 300x900mm? Would be a really handy size.

 

[huntingrob]

Howdy fellas, been a while since i been on. Thought I'd pop in and say g'day. Been pretty busy the last coupla months.

Built myself an alaskan mill

Milled some slabs

And picked up an old clunker to do up

Sent from my SM-G800Y using Tapatalk

 

[VinceGU05]

what size is yr carlton bar there rob?

 

[huntingrob]

what size is yr carlton bar there rob?

42" mate. I gave up an inch or so on the powerhead end though. Didn't want to get too close to the slot.

Sent from my SM-G800Y using Tapatalk

 

[VinceGU05]

42" mate. I gave up an inch or so on the powerhead end though. Didn't want to get too close to the slot.

Sent from my SM-G800Y using Tapatalk

nice ! i just bought a hurricane pro bar 42". was all i could find in 42".

 

[peter92]

top bloody song