Husqvarna Test Tools

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tothemax

ArboristSite Operative
Joined
May 22, 2014
Messages
379
Reaction score
118
Where is the best place to buy the test plates for vacuum/pressure testing the 372xp?
 
Actually I do have one more question. What tool works for removing the flywheels on the modern husqvarna's? I found two flywheel removal tools and I am not coming up with what they work on. Just says coarse or fine thread.
 
You don't really need test plates....just use the muffler and the carb....you DO need some rubber. I use old inner tube. Some thicker stuff than bicycle rubber is nice.

If you know anyone with a 3d printer you can print plates :)
 
I bought some 1/16" thick silicon rubber from M-C. 12x12 sheet for 12 dollars. I've almost used it all up and have made 8 different block offs fully customized for different machines variances.
 

Latest posts

Back
Top