Oregon Pro bars?

[sILlogger]

i was just wondering if there was any place on-line/mail-order that these bars can be purchased from?? are they considerably better that the Power Match,(what i usually run) thanks

 

[chainsawjunky]

Are you talkin the Pro-lite, or Pro? Evan

 

[sILlogger]

Pro

 

[tek9tim]

My 660 came with a 32" .404 oregon pro. Seems alright, but I almost never run it.

 

[Lou]

Amick's (sponsor) sells the pro in a 12". Might be worth an inquiry to Tony.

 

[Diesel JD]

IDK what they are....maybe have to check oregon's site. I only knew about the consumer bars, the pro-lite, and the powermatch.

 

[computeruser]

not

 

[cuttinscott]

Oregon PRO

The "Oregon PRO" bar's are ONLY available in 3/8" &.404" versions of 32", 33", and 36" in D009 and D025 mounts. And generally run about $20 - $30 more than their PowerMatch counterpart. I can order these but I do not Stock this bar normally. Depending on Distributors Stock.. I pull from 5 different distributors depending on availability.

323PMDD025
338PMDD009
338PMFD009
338PMDD009
363PMDD025
363PMFD025

Scott

 

[Lou]

My bad Scott;
forgive me please. Maybe you need your own web site or need to point it out to me. I have clicked your links but they go to manufacturer's sites. Manufacturer's sites don't register with my old processor. No malice intended.
Lou

 

[sILlogger]

so i dont' guess u can get an oregon pro 24" then?

 

[royta]

You probably can't get it in .050 either. I did a search for my 044. 32's and 36's with 3/8" and .063" show an Oregon Pro. If I change to .050", no Oregon Pro.