Chainsaws and Lifelong Friends Raffle

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That makes me sad.

Over the last couple of years, I've started several threads here.......but they never generated any replies. I guess I need to just accept that things are not ever gonna be like they once were.

Oh well.

There are still quite a few guys that respond to technical questions and provide some help to get saws running or to find parts, etc.
 
Much of the old crowd has simply moved on and the new crowd couldn't care less about em..., and/or are probably glad some or most of em are finally gone. Plus it seems like every time we sign in somewhere these days there's a raffle for someone at the top of the subject list. Lots of folks are simply turned off by the solicitation factor if they're not part of the inside group supporting the beneficiary of the effort. Frankly, the term 'favoritism' seems to be a fairly accurate one when it comes to how folks view these events..., which can certainly breed resentment and exclusion rather than the desired result.
Hell, lots of members could probably use some help but aren't seein' anyone jumpin' up and down raising money for them. Not casting any particular aspersions, here. Just saying what lots o' folks are probably thinkin'..., if they even open these threads in the first place.

And the fact that Jeremy's situation generated such a monumental amount of activity can't be ignored as having an impact on folks' charitable resources probably being tapped a little thin in general right now, too. Can't blame folks for not having what they'd otherwise be willing to give.

Certainly no fault of Jon's, yours, the sponsors of the effort, or anyone else. Just a combination of change over here, unfortunate timing, and the way it is.
 
Much of the old crowd has simply moved on and the new crowd couldn't care less about em..., and/or are probably glad some or most of em are finally gone. Plus it seems like every time we sign in somewhere these days there's a raffle for someone at the top of the subject list. Lots of folks are simply turned off by the solicitation factor if they're not part of the inside group supporting the beneficiary of the effort. Frankly, the term 'favoritism' seems to be a fairly accurate one when it comes to how folks view these events..., which can certainly breed resentment and exclusion rather than the desired result.
Hell, lots of members could probably use some help but aren't seein' anyone jumpin' up and down raising money for them. Not casting any particular aspersions, here. Just saying what lots o' folks are probably thinkin'..., if they even open these threads in the first place.

And the fact that Jeremy's situation generated such a monumental amount of activity can't be ignored as having an impact on folks' charitable resources probably being tapped a little thin in general right now, too. Can't blame folks for not having what they'd otherwise be willing to give.

Certainly no fault of Jon's, yours, the sponsors of the effort, or anyone else. Just a combination of change over here, unfortunate timing, and the way it is.


You are entitled to you opinion and some of what you say is correct but I somewhat feel you are still insinuating something unsaid.

Let me be clear Jon did not ask for this we forced it on him. If others need help but have no one to speak up for them then to me that says they aren’t really a member of a community.

Frankly with the value of the prizes being double the donation target I don’t care who the money goes to I would want in on some of that action.

When I first joined this site I didn’t know anyone or anything. Now I have some close friends and Stihl don’t know much... I bought in to the first raffle not because I knew anyone involved but I wanted a chance to win some pretty cool ****. I won a ported saw from @Mastermind Worksaws and from that point on we chatted regularly and have become friends. As a matter of fact anytime I need a good chuckle I can call Randy and have a good laugh. (Yes I am saying he talks funny...)
 
Just a few politely stated facts without using words like clique, elitism, preferential...., perhaps more descriptive terms for the 'unsaid' aspect you're referring to?

If others need help but have no one to speak up for them then to me that says they aren’t really a member of a community.

And whose community would that be? Yours? That's a pretty cold statement and pretty much just made my underlying point. If you don't sit at the cool kids table, you're not going to receive the same treatment as the cool kids. I'm not saying there aren't a lot of great people involved in this. There are.
There are also a lot of folks who may be in equal need that go unnoticed simply because they choose a different style of community participation or involvement. That doesn't make them any less deserving. Just a lot less likely to be the recipients of these types of efforts. That's all I'm saying.

I'm not here to argue about any of this. I simply responded to the general dismay being conveyed about the lack of participation toward the cause over here. No more. No less.

I generally applaud folks who undertake these efforts. I realize doing so is not an easy task. I also generally contribute to the extent that I may be able because I'm a charitable person, not because I want to 'get in on the action'.

Some of these events go better than others for any number of reasons. I stated a few. Having folks complain about the lack of participation certainly doesn't help the cause in a positive way or convey a very good look, though. Turns people off even more..., no matter who you are or where you're from.

Here's wishing Jon the best and to a successful rally before the bell for some very cool stuff donated by some very generous contributors. Hopefully someone who needs a new saw actually wins one.
 
I have donated to these fund raisers and do have one question. Why not go thru paypal friends an family avoiding gofundmes 10 percent hair cut.
 
I have donated to these fund raisers and do have one question. Why not go thru paypal friends an family avoiding gofundmes 10 percent hair cut.
PayPal does not like raffles - they reportedly have cut off some accounts of members trying to do this in earlier raffles.

PayPal takes a % out too if you don't link your bank account to them.

Go Fund Me % is optional - you do not have to donate.

Philbert
 
Wait, am I a cool kid now because I donated? "In the clique"? Or are there levels of coolness or "eliteness" depending on how much I give? So I can be even cooler?


I bought some raffle tickets at the Osseo Heritage Days and Mushroom Festival this weekend and one last weekend for the Hillsdale Conservation Club rifle raffle. What does all of that mean? Am I cool with them too, or just like to donate?
 
Wait, am I a cool kid now because I donated? "In the clique"? Or are there levels of coolness or "eliteness" depending on how much I give? So I can be even cooler?


I bought some raffle tickets at the Osseo Heritage Days and Mushroom Festival this weekend and one last weekend for the Hillsdale Conservation Club rifle raffle. What does all of that mean? Am I cool with them too, or just like to donate?
You are the COOLEST! :bowdown: I also get it. :popcorn2: Also donated, but low level cool. :cold:
 
You are the COOLEST! :bowdown: I also get it. :popcorn2: Also donated, but low level cool. :cold:
I could be wrong, but the post along with his title I sense some history. I'm not a member of the other site either, but none of that matters. I think @PogoInTheWoods should take up for someone who he feels is left out. I will help with a prize and donation. Reminds me of the high school girls I dated that would ***** and ***** but never do anything.
 
New Updated Prize List.

If you haven't won in a raffle now is your chance, some seriously good prizes up for grabs...

1. New 461 group donation ported by @Mastermind

2. Partner P100 SuperDonated by @TRoller

3. Makita EA7900 Donated by @Gentleman

4. Rebuilt MS660 Donated by @Adirondackstihl

5. Shelf Queen Craftsman 2.0 Donated by @Stump Shot

6. Husqvarna 254XP Donated by @Dub11 (with rebuild and 4S port job by @Stump Shot)

7. 044/046 CFB Hybrid donated by @GCJenks204

8. Port Job by Fat Fingered Saws LLC @huskihl

9. Slow Race Saw Build by @redfin ( Owner provides the parts for how they want it done. Just note, slow refers to how long it will take him to get it done, not how fast your saw will be).

10. **Updated**16" 60 DL 3/8 .058 Husqvarna Branded / Windsor built Bar with an EM mount. Similar to D005, can work on D009. Donated by @Big1066ih

11. Custom Built Chainsaw Vice donated by @mycamaro_68

12. Hutztl 660 Clone Saw Kit with Cross MMWS Cylinder (to be asssembled) donated by @morewood

13. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

14. Raisman 20" K095 3/8's .050 Bar Donated by @Czed

15. MMWS288XP from Down Under donated by @treesmith

16. Mint Poulan 3800 Donated by @ncfarmboy

17. Almost mint Solo 603 machine marks still on piston through ex. port. Gone through completely cleaned. Carb. kit fuel lines, filter, muffler cleaned repainted high temp baked, spikes repainted, w/ original Solo .404 x .063 20" bar most of lettering still on it. Also donated by @ncfarmboy

18. A very nice McCulloch Double Eagle 50 in good working order with nice bar and a new chain, user manual. Donated by @ajschainsaws

19. A @rattler ported Husqvarna 550 XP Donated by Chris Jackson at Trees Inc. and @Onan18

20. A M105a1/a2 1.5ton surplus military trailer. It will have side boards and bows, just no head board or top. It has a bed lining sprayed in that the Marines didn't even jack up. Donated by @morewood (pics and details starting at post 137)

21. @TermiteBuffet Labour -
A - A full woods port .

B -A case up rebuild of your saw ,you supply parts I do all labor ... to be clear I'll strip it all the way down to split cases , clean scrub saw ..and reassemble with whatever parts you so desire ...also a muffler mod , and squish setting ...

22. Brand new in the box 2258 Jonsered. Donated by @miller Mod Saws

23. Zama C1QDM14A Carb / Clutch Drum for a Makita / Dolmar 5105 Donated by @Dahmer

24. A brand new in the box Walbro HDA 198, perfect for a Tree Forty Six project. Donated by @Onan18

25. A brand new Stihl ES light 3003 20 inch 3/8 .050 bar I'll donate. Box has been opened but only to look at the bar. Donated by @Harzack223

26. While not 100% finished with this nice 032AV, with help of @glock37 on a couple things. Donated by @Stump Shot

27. Husqvarna 2100cd Donated by @Frank bierce

28. Carhartt Oregon Logo Jacket, black - size XL (includes shipping in the US) Donated by @Philbert

29. Honey Roasted Peanut: formerly known as Peanut - a small case 064 with new MS660 cylinder ported will have new piston of whichever type the builder repairing it selects, includes custom air filter base and v-stack. Donated by @Definitive Dave re-ported by @huskihl

30. Lipstick Betty, formerly known as Ugly Betty - a small case 064 with new MS660 ported cylinder and a meteor 288 piston, includes custom metal top cover badge and v-stack. Donated by @Definitive Dave re-ported by @Mastermind

31. ***NO LONGER AVAILABLE***Drill Doctor 750X drill bit sharpener. Donated by @USMC615 THIS WAS BEING SHOWN SOME BROTHERLY LOVE BY JASON'S BROTHER AND APPARENTLY HE PUT THE WRONG THING IN THE HOLE OR SOMETHING AND IT GOT BROKEN.

32. 94 rounds of various reload 450 marlin hollow point and hard nose. Donated by @TRoller (pick up only)

33. 189 rounds of hollow point 44 mag. Donated by @TRoller (pick up only)

34. 47 rounds of hard nose 357. Donated by @TRoller (pick up only)

35. Pro Mac 700 to @Chainsaw Jim to be restored and ported as a donation for the Raffle. I am donating the saw and any money needed for parts, and Jim was kind enough to donate his time and labor. Saw and parts donated by @TreeLife labour donated by @Chainsaw Jim

36. A lightly used Stihl MS211. Donated by @USMC615

37. Vintage John Deere 80EV saw Donated by @Deets066 & @ri chevy

38. A hand made handle with vintage axe. Crafted and Donated by @XP_Slinger

39. 2 x 20" GB Ti Bars A041 mount (one modified to fit K095) and 1 Stihl Picco chain to match.
Donated by @psuiewalsh

40. Now Collector's Item Dolmar hat, donated by @psuiewalsh

41. 20" Oregon .050 Hardnose Bar D009 Mount and box of .404/ .050 Chain. Donated by @psuiewalsh

42. Old skool Poulan branded Windsor 36". Never been on a saw. It has a 3/8 tip on it now, I forgot to check gauge but I'm sure it's .063, I'll measure it tomorrow. Jon can tell you more about this than I can, since I got it from him. It's a D196/UXL mount I believe. I bought it for a 750 homelite. Donated by @DSS

43. A new custom hand made pipe. its made out of Italian Briar. With about 40 hours of love and craftsmanship in to it. Donated by @Quietfly

44. Homelite Super XL-925 donated by @crabby cooter

45. 3 NIB Oregon chains 73LGX084G = .058 3/8 84dl donated by Greg Newman

46. 10 boxes of either Oregon 72jgx072g or 72lgx072g chain. Winner has there choice. Donated by @IcePick69

47. Oregon Powermatch 20" bar. Winners choice of mount. Donated by @IcePick69

48. New in Box Maruyama MCV42 Chainsaw. Donated by @IcePick69

49. Survivor Homelite Super 2, the original owner is an older gentleman who cannot use the saw anymore. Put away running years ago probably just needs cleaning to have a runner here. Includes case and owners manual. Saw has strong compression and should be a fun vintage to add to a collection! Donated by @malk315

50. Three loops of 28" .404 .063 Carlton Chain. Donated by @Deets066

51. I’d like to offer 50 of my exhaust deflectors. Donated by @XP_Slinger (more details post #641)http://************/attachments/b2247b34-fdb1-41fd-a601-7a013d7a363c-jpeg.120588/

52. A personally crafted belt axe/knife combo.....stay tuned. Donated by @Scotty Overkill

53. I have a new Golf Piston for a Husqvarna 41 That I will donate. Donated by @tomdcoker

54. It will be one .5 Gallon (2L) Extra Virgin Olive Oil and Mediterranean and Greek Delicacies (Dry Goods)-- including shipping. Donated by @AlfA01

55. It will be one .5 Gallon (2L) Extra Virgin Olive Oil and Mediterranean and Greek Delicacies (Dry Goods)--including shipping. Donated by @AlfA01

56. 5 loops of Carlton A2EP-072E chain 3/8" .058 Semi Chisel from @166 is being re-gifted by @BonScott46

57. Stanley Carpenter's Axe donated by @ajschainsaws

58. 20” Archer Pro Plus bar. It was on a 6100 for 3 test cuts. 3/8, .050, 72 dl (I believe Small Mount K095) Donated by @Dahmer
Ding, now over $8k let's keep helping a friend who has helped so many of us.
 

Latest posts

Back
Top