Inside the MS462C - Snellerized Style

[Czed]

Exactly!




Oh. You're being serious. He's a faller/saw porter from the pnw, YouTube officianado. Home of the $1000 port job

How much does a "east coast franchisee"
Porty jobbie cost?
Or does hotsaws know there is a franchisee.

 

[Frank Rizzo]

How much does a "east coast franchisee"
Porty jobbie cost?
Or does hotsaws know there is a franchisee.

For you ? $1000 .... and that includes a steak dinner with all the fixings!!! And if you act now ... 1 case of ice-cold Schmidt’s beer ... in da can!

 

[blsnelling]

Here's what I've compiled so far.

Small Outer spike
1142 664 0501

Big Inner spike
1122 664 0506
Big Outer spike
1122 664 0509
Wide clutch cover
1142 640 1702
Chain catcher
1122 650 7702

Nylon filter
1142 140 4401

@blsnelling
Which part number do you use for the wide clutch cover?

I've been told that this PN includes the large spike.

 

[SCHallenger]

I wonder what the dry powerhead will weigh after it has been ported?

 

[crabby cooter]

70 lbs with those big spikes, lol
some guys spikes are sharper then there chain

 

[Westboastfaller]

I've been told that this PN includes the large spike.

You can't win. Stihl certainly offers more in this department. Husqvarna 3 series from about 357 - 390 can come with small dogs or felling dogs which can be undersized for the coast so you have to go AM or custom for 372-390 'Westcoasters'.

Are the large ones the same as what Ryan posted at top of p9 above the black ones? The only diff from the black one is about 5 min grind on the bottom spike to make them even length and a shorter depth if you chose to shape them the same.

T

 

[Frank Rizzo]

I wonder what the dry powerhead will weigh after it has been ported?

My guess is that after being ported by Snelling the earths rotation will be altered in such a manner that the force of gravity will no longer apply ; rendering such measurement redundant

 

[Deleted member 150358]

Got one of those new laser driven atomic clocks ready? We can measure the shift in time caused by the change to gravity caused by the MM alone.

 

[MGoBlue]

some guys spikes are sharper then there chain

Especially next months calendar entry...

 

[blsnelling]

I picked up the 25" Light bar and a new RS chain last night. I won't be doing anything with the saw until Saturday. Unfortunately, it's forecasted to be raining so there might not be any action videos.

 

[SCHallenger]

My guess is that after being ported by Snelling the earths rotation will be altered in such a manner that the force of gravity will no longer apply ; rendering such measurement redundant

Hmmm. Does that mean you might drift off into space & not bother this thread anymore?! LOL!

 

[bayard]

what is going on in this thread?

 

[Frank Rizzo]

Hmmm. Does that mean you might drift off into space & not bother this thread anymore?! LOL!

aw shucks ! We all woodnt miss this for the world !!!

 

[Frank Rizzo]

what is going on in this thread?

According to the OP the game is rained - out !!!

 

[NCPT]

I picked up the 25" Light bar and a new RS chain last night. I won't be doing anything with the saw until Saturday. Unfortunately, it's forecasted to be raining so there might not be any action videos.

View attachment 687092

Bummer on the forecast. I really like the way this saw will be set up.

 

[BonScott46]

nice to see the real weigh.
I read the 500 as 6.2 kg x2.2...lol
your scale has the 462 a smidge under 6.5 kg.
Seach 371xp specs and it will take you to
362, 365, 371 Technical data.
the 371 is listed 5.9 kg , 13 LB

the other two are at 6.0 kg
I believe the 372 oe was always 6.0kg and 6.2 generated.

I tried to get some numbers on the 372 XTorq it was coming up 6,6KG and I believe the same for 572xp.

6.9KG for the 576 or .66 lb more.

If the 572 is truely 6.6 then its about 3.5 oz diff than 462?
Fwiw

EDIT ^^572 rather

I am getting 6.05kg on the 462 without any fluids which would be over a pound lighter than the 572, not that that is huge but it is about 5 times more than 3.5 oz.. The numbers I am seeing on the 372oe are 5.2hp not 6.2 and the heavier X-Torq is 5.4hp.

Edit: 462 c-m is listed here in Europe as 6.0kg and 6.1kg with heat.

 

[rocketnorton]

might run better in rain.

 

[Westboastfaller]

Might want to check your calculations. The weight showed in the picture, 13lbs 4.6oz (13.2875lbs) is 6.027kg. 6.5kg would work out to 14.33lbs.

OK thanks guys, I appreciate the correction.
Since the site changed servers, it seems I can't see personal pictures anymore so I've had nothing to reference
back to. I originally thought(for the first day) the scale read 13, 4oz (13.250) Then Andre posted his 562 dry weigh. recall it was 13.330lb.? At this time I could swear up and down I was seeing 14, 4oz over and over. (462) That's just beyond disturding.
Numeral and directional dyslexia?
I know a little about it. Take it from the kid who wore sweaters inside out and back to front and was too afraid to follow chickens into the corn fields...BUT...I did make a living in the bush for just short of 30yrs. Lolzz
maybe the next profession will be mathematics? Hey as long as one enjoys. Right.
Just got to get over that little problem of not believing my own eyes anymore.

I am getting 6.05kg on the 462.
The numbers I am seeing on the 372oe are 5.2hp not 6.2 and the heavier X-Torq is 5.4hp.

[/QNOTE]

 

[Westboastfaller]

@BonScott46
I was talking weights only.
"generated 6.2" (or 6.3kg) Is to mean heated model weight as listed as
in XPG.

But...since you brought it up...

I think the 371 and perhaps the very early 372 may have been 5.2 hp
with the Walbro HD6?
Its more common to see it at 5.3 (HD 12) and sometimes 5.4
XT at 5.4 and sometimes 5.5hp

 

[BonScott46]

Has anyone figured out if there are stiffer AV springs available?