Makita DCS6421

[False]

I just got one of these from HD (139 so why not) and want to get a good 24" bar for it. Any suggestions for lightweight?

I see these two but not sure the exact weight/quality difference.

https://www.chainsawsdirect.com/Oregon-240VXLHD009/p76881.html

https://www.hlsproparts.com/product-p/vt3u-0q62hv.htm

Also does the idle on this saw seem a little low? I plan to get a tach and properly tune it but till then I could turn a screw a little.

 

[Poleman]

If your wanting a Light weight bar I suggest the Sugi. Good quality and nice bars.
Saw does seem a little slow on idle as it on the verge of struggling.... but idle is a personal prefferance as long as the chains not spinning and it’s not dieing your good. Acceleration off idle good?? If not a little more may help clear it up. Possible L needle adjustment needed also.

 

[buzz sawyer]

I've been using the Woodland Pro bar on mine for a couple years now. I don't cut a whole lot but it seems to be holding up well. Set up my friends 7900 with the same thing and he cuts a lot. Also holding up well. I agree on the idle sounding low, kick it up a little.