Sold Husky 346XP, 20", 160 PSI, Runs Great

[davefr]

Up for sale is a Husky 346XP with 20" - 3/8" Bar. The saw tests at approx. 160 PSI, I've included a couple images of the cylinder wall and piston taken from the muffler port. It's hard to photograph but they look excellent. This saw is the E-tech version but I changed the muffler several years ago to the non cat version. (P/N 503862802).

This saw starts easy and runs great! Everything works as it should. There is no damage but there are normal scratches, scrapes, marks and a small portion of the top cover has a burn mark right by the muffler outlet.

Price is $350 + shipping or free local pickup close to Portland, OR. Please PM with any questions.

 

[old guy]

That blue 42 means thats the 45 c/c oe model.
I have two of those they scream.

 

[spyder62]

Nice looking saw! I prefer the OE over the NE

 

[cuinrearview]

That blue 42 means thats the 45 c/c oe model.
I have two of those they scream.

Nice looking saw! I prefer the OE over the NE

Not sure which I prefer, but the 42mm jug does make for a fun saw!

 

[davefr]

How about $350 and I'll pay the freight to the lower 48? Or $325 PHO and free freight. This is really an excellent running 346XP.

 

[cuinrearview]

Is this an OE with a different starter or an NE with an OE top end? If the latter, who did the work? Some history on the saw might help with the sale.

 

[davefr]

To the best of my knowledge this is an OE E-tech saw. The only modification I've done is to swap the cat muffler with an OEM non cat version. I'm pretty sure the top end is original but I'm not the original owner so can't be 100% certain.

Are you suggesting the E-Tech starter label only came on NE saws?

 

[cuinrearview]

To the best of my knowledge this is an OE E-tech saw. The only modification I've done is to swap the cat muffler with an OEM non cat version. I'm pretty sure the top end is original but I'm not the original owner so can't be 100% certain.

Are you suggesting the E-Tech starter label only came on NE saws?

I've never seen an E-tech OE. Take a close up pic of the serial number plate.

 

[davefr]

 

[cuinrearview]

That's cool. Would be a rare one for sure. It looks like both were available in '04. GLWS.

 

[r black]

i have had 2 o.e. e-tech models they run great just have the ( epa muffler ) and green fuel cap e-tech badge ..op has removed the muffler nice saw...

 

[subhunter]

Good Morning . is this saw still available?

 

[davefr]

Yes, it is. I lowered the price in post #5.

Regards,
Dave

 

[subhunter]

Send me a pm please. I am interested in pho.