Nik's Poulan Thread

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Be sure you send some pictures our way

Will do if I remember. The weather forecast changes drastically every 4 hours or so. It looks wet.

I go down Saturday, GTG on Sunday, stay over and head home Monday. Roughly an 8 hour drive each way.

Lots of fun. It really good to meet people on here face to face.

If any of you have a chance to get to one, you should make the effort.

I've made one every year since 2013,

I just wish they were a bit closer to home.
 
Heading to the Upstate NY GTG this weekend. Taking one Canadian and two American built hot rods. Homelite XL-76, Poulan 5200 and a McCulloch CP125.

All three pretty special units.
Could you tell me where and when GTG is happening in Upstate New York

Sent from my SM-G920V using Tapatalk
 
Just got this 306A and a Dayton the Dayton looks like a Poulan micro
1f4404b45b4dedd2e385cf3c2fa74e1d.jpg
4d89f16e8c26e1c0c28ce2cc20911b8e.jpg


Sent from my SM-G920V using Tapatalk
 
Yep I'm going to get a bow for the 306A

Sent from my SM-G920V using Tapatalk
 
I took this poulan countervibe stuff in trade today to help a local get his parts he needed. Traded 380 3750 p+c and 22" badboy bar and new chain and a crankcase for his 3450.

The poulan 4000 has a 3400 rear handle on it do to the 4000 handle in pic was cracked and other half broken. The 4000 recoil pulley and recoil still good but he said the flywheel had a issue. So replaced with a 3400 flywheel and recoil cover.

Craftsman 3.7 was told runs but has a break you can see in rear handle at back L. 3400 just a part saw with clean looking piston.

Will sell or trade off to folks too.

DSCF2031.JPG DSCF2033.JPG DSCF2034.JPG DSCF2037.JPG DSCF2039.JPG
 
Back
Top