extra long torx bits

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chainmailer

ArboristSite Lurker
Joined
Apr 6, 2019
Messages
23
Reaction score
19
Location
igo, california
anyone know where to get extra long torx bits for removing cylinder bolts? i live in a small town and cant find locally! I found a set online but they have handles and I would like to find some that will go in my impact screw gun! any info appreciated! Craig
 
I've got a T-25 & T-27 from Stens, long shank T-handle that work on virtually everything between them.
 
I would recommend a bit longer than the 3.5/90 mm. At 3.5" long it would be getting very close to not reaching on the 066 and up cylinders. I bought the 6" long Whia bits for my tool box.
 
I like the mix. My stubby on the impact handles a lot, then by hand for the cylinder bolts, the Husky muffler bolts, and the strange ones around the wrap on the starter side.
 

Latest posts

Back
Top