extra long torx bits

[jltrent]

This is what I use......

https://www.ebay.com/p/Wiha-74590-T27-X-152mm-Torx-Power-Bit/1600092895

 

[Rob Stafari]

https://www.amazon.com/Irwin-Tools-...6+"+t27+irwin&qid=1557494583&s=gateway&sr=8-3

This one has done me well. I have a more expensive one that is 3/8 socket drive, but it never gets used. That one in the impact to snug it up. Then a craftsman T-handle with my highly calibrated torque wrist to finish it off if it is a more critical bolt as in cylinder head.

 

[Yotaismygame]

http://www.sawagain.com/tools/?sort=featured&page=3

 

[brandonstc6]

Just go to google or e-bay and search for wiha torx bits.

Wiha bits are super soft. I bought 3 and 2 of them failed on the first use.


Sent from my iPhone using Tapatalk

 

[brandonstc6]

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/392168100360


Sent from my iPhone using Tapatalk

 

[Yotaismygame]

The ones I bought from saw again I've been using for a year regularly with no issues. They ship fast too.

 

[HarleyT]

Wiha bits are super soft. I bought 3 and 2 of them failed on the first use.


Sent from my iPhone using Tapatalk

Must be bootleg junk.

 

[pioneerguy600]

Ha! And most people LOVE dogging out America for not switching to metric.

If the whole world was all metric then there would be no problem.

 

[farmer steve]

If the whole world was all metric then there would be no problem.

I'd Stihl go to the lumber yard and ask for 2x4x8's and 1/2 inch plywood.

 

[pioneerguy600]

I'd Stihl go to the lumber yard and ask for 2x4x8's and 1/2 inch plywood.

Yea ,me to but its the converting back and forth that bugs the heck out of me especially in building materials.

 

[pmbou]

I bought this on ebay recently and its made in china but seem fine so far, at least up to the 15 Nm max torque called for on stihl t27... yes Im anal and torque everything to service manual specs. 3.99+3.50 s/h

STIHL ~ Husqvarna ~T27 6" TORX Power BIT~ Replaces OEM : Stihl 0812 540 1112

 

[a. palmer jr.]

I had to buy one for removing cylinders from Stihl TS420 concrete saws, ebay has several different ones.

 

[HarleyT]

If the whole world was all metric then there would be no problem.

World peace?? No more war???
No global warming????


Errr, climate change???

 

[CR888]

Wiha bits are super soft. I bought 3 and 2 of them failed on the first use.


Sent from my iPhone using Tapatalk

Yeah, not sure I'd put a blanket statement on Wiha bases off 3 bits. I have over 100 Wiha bits and T/handles & stuff & that's not the experience I've had. Maybe you got a poor batch or was bootleged.

 

[chainmailer]

Thx everyone for all the info! was hoping to find them locally but couldnt so bought the set ronie recommended from amazon! they are six inch and have a variety of different screw tips as well! thx ronie and everyone who posted! love this site!