"You Suck" Thread 2019--Pics required!

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Status
Not open for further replies.
My brother got a runner 08S Stihl, a minty Pioneer, and a bunch of Homelite parts (going up for sale soon) for $270 and I got another 361 from the same person as my other one for $25. I got all the missing parts with the other saw without the knowledge of their being another saw and re-assembled it after I got home from work. It's another X ------------ serial numbered saw as well. I don't think I can bring myself to part with either yet, though I don't really need 2. Both need a carb kit and the newbie needs a new fuel line and a couple bits of hardware before it'll be a runner.
IMG_3301.jpg IMG_3302.jpg IMG_3303.jpg IMG_3304.jpg IMG_3305.jpg IMG_3306.jpg IMG_3307.jpg IMG_3318.jpg IMG_3320.jpg IMG_3322.jpg
 
My brother got a runner 08S Stihl, a minty Pioneer, and a bunch of Homelite parts (going up for sale soon) for $270 and I got another 361 from the same person as my other one for $25. I got all the missing parts with the other saw without the knowledge of their being another saw and re-assembled it after I got home from work. It's another X ------------ serial numbered saw as well. I don't think I can bring myself to part with either yet, though I don't really need 2. Both need a carb kit and the newbie needs a new fuel line and a couple bits of hardware before it'll be a runner.
View attachment 740121 View attachment 740122 View attachment 740125 View attachment 740126 View attachment 740127 View attachment 740128 View attachment 740129 View attachment 740130 View attachment 740131 View attachment 740135
Tin ass , you suck.
 
Been a while since i posted. Here's my latest. It's only minor suckage though. It's a one home saw. Meaning the guy i bought it from bought it from the guy that he bought his house from. Came with a 20" and 25" bar, 2 sharp chains for each and the case. Was said to have been sitting for 2 years, which is why it took 4 pulls to start. Had to give $225 for it. Fwiw, it's a 10mm wrist pin.
 

Attachments

  • FB_IMG_1560018456723.jpg
    FB_IMG_1560018456723.jpg
    78.1 KB · Views: 78
Been a while since i posted. Here's my latest. It's only minor suckage though. It's a one home saw. Meaning the guy i bought it from bought it from the guy that he bought his house from. Came with a 20" and 25" bar, 2 sharp chains for each and the case. Was said to have been sitting for 2 years, which is why it took 4 pulls to start. Had to give $225 for it. Fwiw, it's a 10mm wrist pin.

I’d say DEAL !!


Erik
 
My brother got a runner 08S Stihl, a minty Pioneer, and a bunch of Homelite parts (going up for sale soon) for $270 and I got another 361 from the same person as my other one for $25. I got all the missing parts with the other saw without the knowledge of their being another saw and re-assembled it after I got home from work. It's another X ------------ serial numbered saw as well. I don't think I can bring myself to part with either yet, though I don't really need 2. Both need a carb kit and the newbie needs a new fuel line and a couple bits of hardware before it'll be a runner.
View attachment 740121 View attachment 740122 View attachment 740125 View attachment 740126 View attachment 740127 View attachment 740128 View attachment 740129 View attachment 740130 View attachment 740131 View attachment 740135
So this may qualfy,,, 2 piece heating kit for 20190615_104428.jpg$25..... why I got to auctions
 
No pics yet but I got a butt-ugly abused 048 for $100. It has a (busted yet fixable) fullwrap, 3 different screws for the recoil, busted recoil screw holes, non-working chain brake sans handle, a piece busted off the case, bad av bushings, and an awful yellow pull handle. But, it was $100, I'll be selling a duplicate ms361 sans b and c for $350, and the profit from 361 will go into Mr. Ugly.
 
Oregon speed cut got it off Amazon. Not shure if its a fake or what but the weld came apart after a few days of use... You suck
99faf02262bbe2be2bc9c1918dbab5bf.jpg


Sent from my LM-G710VM using Tapatalk
 
Here's some pics of El Junkador, the 048. And somewhere on AS is a pic of the green weenie setup I hope to put on it. The original filter is less effective than a piece of screen door so it's got to go.
edit: Yikes! The crappyness of the saw carries over into pictures of it as well! Or I should have waited till the next morning to take the pics instead of taking them at dusk.... Too late for better ones as it's in a million pieces now.
IMG_E3363.jpg
IMG_3364.jpg
IMG_E3366.jpg
IMG_E3365.jpg
 
Picked up a 020 av Super at a yard sale yesterday...$5 :D
Needs some work but piston/cyl are perfect, great compression.

I need to figure out how to disassemble the brake (pictured) to see what parts are needed. There is no explanation in the service manual for this. It looks like I have to grind/drill out one rivet and go from there. Any suggestions?

It has the Aus 2pc muffler :D

need one pawl spring
need 3/8" lo-pro bar/chain ...that should be pretty easy.
so far that's all I've found lacking.
 

Attachments

  • IMG_20190617_230649701_HDR.jpg
    IMG_20190617_230649701_HDR.jpg
    3 MB · Views: 35
  • IMG_20190617_230631987.jpg
    IMG_20190617_230631987.jpg
    2.7 MB · Views: 38
Status
Not open for further replies.
Back
Top