Need chain for my homelite 2100 saw

[Edward C Smith]

I am hoping someone out there can help me out with a new chain. I have a homelite 2100 saw and acc. to the spec sheet it takes an oregon #52 with. 404 pitch. The drive links on my current chain are #40, and i believe its a. 063" gauge, there are 81 of them. The blade is 29" end to end and is stamped 101 Homelite GW-2528-A.
As usual, any and all help greatly appreciated!!

 

[Marine-piper]

https://loggerchain.net

Call and talk to them, great to work with.
All the information you need you know, what you need is someone to spin you a loop.

 

[buzz sawyer]

Site sponsor: https://www.baileysonline.com/chainsaws/chainsaw-chain/semi-chisel-chainsaw-chain/404.html

 

[Edward C Smith]

Thanks!!
Will call them today.

 

[undee70ss]

A Homelite GW 2528 bar takes 82 drive links of 404 pitch .063 gauge chain or 67 drive links of 1/2 pitch .063 gauge chain.

 

[Marine-piper]

Undee if I give you my bar # can you convert the 1/2" chain to .404 too?

Sent from my SM-G965U using Tapatalk

 

[Edward C Smith]

Thanks once more for your help!
I counted 81 drive links. Will recount!!

 

[undee70ss]

Undee if I give you my bar # can you convert the 1/2" chain to .404 too?

Sent from my SM-G965U using Tapatalk

Most likely

 

[undee70ss]

Thanks once more for your help!
I counted 81 drive links. Will recount!!

Also count drive sprocket teeth. Should be a 8 tooth for 404.

 

[Marine-piper]

[emoji106]

Sent from my SM-G965U using Tapatalk

 

[rupedoggy]

I don't have new chain but some that is used. Mike

 

[sawfun]

.404 is the best chain for those as the 1/2" chisel is near impossible to get and the .404 chisel seems better than 1/2"chipper chain. Most saw dealers worth their salt will have some .404, though maybe not much of it.