• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Want to Sell Husqvarna 394xp SOLD

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Trent Curtis

ArboristSite Guru
Joined
Sep 29, 2016
Messages
724
Reaction score
839
Location
Boise, ID
BABDAB24-7559-412F-A61D-93B0657C5735.jpeg 9C7E4D03-E2FE-4D83-85F1-F2B87C87E61B.jpeg 1E480557-B230-4161-B393-0AA77FCE9C39.jpeg 4D46134D-72CB-4F65-864A-645F0D4A901D.jpeg CB9A73E1-968A-4C15-9CD1-32F7CF5DFB00.jpeg 7773DE8C-184B-4AFC-80E4-AA193908D665.jpeg 2FB6DA44-D6B8-4131-BF4F-FA81443A1813.jpeg 7A4FBC80-DF4B-4D8B-B46E-B2DC3F1822DC.jpeg BCBFA39F-862B-498E-A8D4-2FBDAF288011.jpeg 76F512D5-9941-4E26-B29B-2B3309520F7B.jpeg This saw is well set up. I bought it from the OO and disassembled for inspection.

At that time i did some port work- very conservative with the grind.

Exhaust port was widened, and lowered to just below the piston crown at BDC. Port ceiling was polished only- didn’t want to lose any of the 394 torque.

Intake was cleaned up and widened just slightly at the cylinder wall.

Lower transfers were tapered out and opened up slightly.

Upper transfers were tapered toward the intake slightly and polished up.

Cylinder was reassembled WITH the base gasket.

Muffler was purchased from another member- he bought new OEM, and then cut in half. Opened the exhaust exit from the inside and then did a beautiful tig job on the weld. Breathes much better than a stock muffler. And looks 100% stock

Handle is full wrap, with large bucking spikes.

I plugged the decomp as I do on every saw I own.

(Video of the saw below)

This saw is well built and ready to go.

$700 shipped PHO
 

Latest posts

Back
Top