ISO carb to cylinder block gasket 2100CD

[jeffbecky1]

I'm looking for a carburetor to cylinder block gasket for a Husqvarna 2100CD

 

[cus_deluxe]

why not just make one?

 

[Mad Professor]

Bicycle shop, ask for flat tire tube.

 

[Huskybill]

eBay,
https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=husqvarna+2100+gaskets&_sacat=0

Partstree.com has the parts. That’s were most of my 2100 parts come from. Try jacks and ereplacement parts too.

When in doubt just ask I been buying parts for months now. You can google the part number too.

 

[Mad Professor]

eBay,
https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=husqvarna+2100+gaskets&_sacat=0

Partstree.com has the parts. That’s were most of my 2100 parts come from. Try jacks and ereplacement parts too.

When in doubt just ask I been buying parts for months now. You can google the part number too.

If you have tractors/trucks (best) , motorcycles (good) , bicycles (will work) save the punctured tubes.

 

[kevin j]

The gasket that comes with the carb kits doesn’t work very well. The pulse hole is offset and the gasket either may cover partially cover the pulse hole or the gasket may be terribly thin at that point. I did a little bit of dremel work and move the pulse hole in the plastic block I think inboard but I can’t recall either in or out and then put a slight offset in the gasket but you’ll have to make your own gasket most likely

 

[farmguywithasaw]

I got a new one from the dealer