Identify this detent valve/lever

[William Balaska]

Picked up this beast of a splitter that needs some love. The detent lever is broke, anyone know where you can find one of these as it not your usual setup. Valve also appears to be able to support another output for other hydraulics, thinking about a lift.

 

[homemade]

Looks like a Cross branded valve. The PB port is power beyond. Let’s you power another cylinder while this one is working. Just put a regular detent return log splitter valve in there. Fully adjustable relief and detent pressure. Can’t go wrong for $100

 

[William Balaska]

Appreciate the response, bit I can replace the handle in minutes if I had a new one, but I'll check with Cross.

 

[triptester]

That valve looks like an antique a replacement if it can be found could be expensive. Other internal parts may also need replacement.

 

[rancher2]

Does the motor run? If it does you may want to run it some and cycle the valve by hand to see how the pump, cylinder is working. Splitter looks like it needs a hyd rebuild. You could end up with a lot of money in the splitter. Watch those hoses while trying it out they look pretty weathered.

 

[cedarhollow]

last time i looked surplus center had new splitter valves for $59, i collect hydraulic stuff and old valves like that are best sold at flea market for $10, however it looks like that handle is removable and could probable weld a new extension to it to operate it. its next to impossible to get new or serviceable parts for a lot of the old stuff. manufacturers have consolidated and bought one another out.