Help identifying a old McCulloch chainsaw

[DisturbeD]

So I've had this saw for a month now haven't done anything with it yet other then try to figure out the model. I've looked at way too many right hand start McCulloch's and still cant right the right saw. Similar looking to the 797 but I dont think that's what it is. Any help is appreciated.

 

[cbfarmall]

Lack of auto oiler and all yellow, 1-7x. Look at the bottom of the crankcase. Should be a model number stamped.

Chris B.

 

[DisturbeD]

Lack of auto oiler and all yellow, 1-7x. Look at the bottom of the crankcase. Should be a model number stamped.

Chris B.

One spot on the bottom I found this just now. Never thought to look there

 

[SEAM]

The yellow (usually black) air filter cover and the bolted-on Model No. plate are a little strange ?? The cover might be original, though, never know with the Macs...

Edit: you just solved it - a 1-71 (never seen one of those), and the cover may have been yellow!

Nice saws!

 

[DisturbeD]

The yellow (usually black) air filter cover and the bolted-on Model No. plate are a little strange ?? The cover might be original, though, never know with the Macs...

Well from what the previous person said to look for I looked up a 1-71 but it's not the same. So either parts have been changed on this saw or I'm not sure.

 

[SEAM]

Looks the same as this one:
http://acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/27f4a335526d64cc88256b610012941c

 

[DisturbeD]

Looks the same as this one:
http://acresinternet.com/cscc.nsf/ed1d619968136da688256af40002b8f7/27f4a335526d64cc88256b610012941c

Yes yes it does just needed to find more then 1 picture of it. Google can be tricky no and again. Ty for the help been bugging me for a short while now. Now that I know what model it is I might get round to seeing if it dead or alive.

 

[DisturbeD]

Lack of auto oiler and all yellow, 1-7x. Look at the bottom of the crankcase. Should be a model number stamped.

Chris B.

Thanks for the assistance on where to look for the model number much appreciated.

 

[DisturbeD]

Well got to working on this saw today. Took a few mins but the old thing still runs good.

 

[SEAM]

Have fun!