Pulling my hair out! WT20 Carb

[KenInTexas]

Hi everyone, I picked up a S25DA that has a WT20 in it. I need to put a kit in it but for some reason I can't find a schematic. I have the service manual (thanks to Ray Benson) But it's not the same model that's listed in the book. The previous owner had removed the gaskets and I have nothing to go by. Any advice would be greatly appreciated!

 

[HarleyT]

Show a pic of the carb, with the covers off.
The walbro ipls will show a variety of gaskets and diaphrams.

 

[Santiago Ferrari]

K10-WAT should do it.

 

[HarleyT]

Hmmm.

 

[alexcagle]

Never seen one quite like that......odd

 

[HarleyT]

Yeah, I looked around the web, to see if I could get a pic of that welch plug.....
If it had one...

 

[LegDeLimber]

Maybe a good low angle side view of the hole and look for signs of a plug being in there?
pic will need to be in focus and focused at the hole, not side of carb body or wall behind it.

Looks like a cell phone pic, so I have no idea how to "half press and hold" a shutter button that ain't there.
Sometimes holding a sheet of paper, your fingers or something at the same distance as the point you want to show helps the camera hit the right distance.

Auto focus is handy most times, but it's a pain when it doesn't know what you're looking at.

 

[KenInTexas]

The welch plugs have been removed, but I have it figured out. The trick was to search on the Sears number (35181) instead of WT20. Thank you for all your help and input!