oaky
ArboristSite Operative
howdy guys
been slowly putting together an 064 project for the past year or so. almost done but im looking at the old cylinder again to make sure its not savable.
spark plug threads are gone, four little chips on one transfers edge, around the other transfer got wear on cylinder wall, another chip on the intake and some odd little wear mark near the exhaust.
not sure if the pistons original, but when i drop it into the cylinder with the plug in it goes down nice and slow.
havent posted in awhile and its that time a year again. hope you guys cutting wood.
thanks guys
been slowly putting together an 064 project for the past year or so. almost done but im looking at the old cylinder again to make sure its not savable.
spark plug threads are gone, four little chips on one transfers edge, around the other transfer got wear on cylinder wall, another chip on the intake and some odd little wear mark near the exhaust.
not sure if the pistons original, but when i drop it into the cylinder with the plug in it goes down nice and slow.
havent posted in awhile and its that time a year again. hope you guys cutting wood.
thanks guys
Attachments
-
F0984F2E-D8A8-405F-B29D-DC742CFB375C.jpeg644.3 KB · Views: 43
-
40D87502-23A3-410D-B6C2-3B336A17FAB3.jpeg726.9 KB · Views: 43
-
E73EBA58-9613-489B-BD2A-329A3A0E0E3E.jpeg818.1 KB · Views: 44
-
CF8234F0-0612-4B77-833D-251718EB4C98.jpeg1.3 MB · Views: 43
-
11269C8F-2132-4A96-A118-B09D677C90E2.jpeg702.4 KB · Views: 42
-
E9429F21-84AE-4437-8B73-D139E9AA4B31.jpeg1.5 MB · Views: 42
-
7DC947CB-1739-44D9-8C70-91A3FFA4ACF4.jpeg1.2 MB · Views: 37