Want to Sell OEM cylinders

[Trent Curtis]

Thinning the boxes of cylinders..... I’m pretty certain I’ve got each model correct but please let me know if you see anything that’s incorrect.

note- the 394 cylinder has a piece missing where the cylinder skirt drops into the case. Won’t effect performance one bit..... but it’s there. It was actually cracked so I just snapped it off. Better to snap off and NOT drop into the crank.

the 272 cylinder has been cleaned up on the exhaust side- will be a runner but isn’t pristine.

The 181 cylinder was molested by some hack who enlarged the combustion chamber..... no idea why. Believe it or not that saw also had 4 base gaskets stacked as well...... he was going for a new porting concept I guess??? Increase head space and lower compression cylinder would work if your going to turn on a lathe to deck and cut squish. I ll throw it in free with the 181 pistons/rings.

All the other cylinders are good. All cylinders are used. All prices are TYD

1. Mahle48zn5+ (162) $75
2. Mahle 54zn13 w2 with decomp (288) $100
3. Mahle 56zn9 w2 (394) $100
4. Husqvarna 5219301 (372XT) $50
5. Mahle ++++ 52zn20 (Jred 2088) $80
6. Mahle ++++ 50zn21 (365 OE) $60
7. (2) 181 thin ring pistons.... w (1) NOS set thin rings $100
8. Mahle 52zn22 (272) $40
9. Complete 372xt top end w intake trac $100
   
   
10. 365xt cylinder $65
    
    
11. $004 1-B (181) $40 needs work on combustion chamber
12. Husqvarna 359 cylinder $75

 

[Trent Curtis]

181 pistons + NOS thin rings

 

[Trent Curtis]

394xp cylinder

 

[Trent Curtis]

288xp cylinder

 

[Trent Curtis]

162 cylinder

 

[Trent Curtis]

372XT top end w wrist pin bearing and intake tract

 

[chipper1]

Sounds like he was getting ready to add a turbo to that 181, not sure those gaskets would have worked, should have cut the base off another cylinder for it .
GLWS

 

[Trent Curtis]

Jred 2088 cylinder

 

[Trent Curtis]

Sounds like he was getting ready to add a turbo to that 181, not sure those gaskets would have worked, should have cut the base off another cylinder for it .
GLWS

And the 181 hackery cylinder

 

[Trent Curtis]

365 OE cylinder

 

[FlyingDutchman]

Maybe he wanted to make it easier to start.

 

[Ketchup]

Pic of the 272?

 

[oman]

365 OE cylinder
View attachment 776806 View attachment 776807

Do you have a cylinder for Husky 390xp?

 

[Trent Curtis]

Do you have a cylinder for Husky 390xp?

yessir I do- but I think I’m going to hold onto it. It’s part of a builder saw that I think I’ll try to put together one of these days

 

[Big Block]

Still have the
365 OE
372XT
365XT

 

[farminkarman]

Do you still have the 365 OE cylinder?

 

[262freak]

You have a picture of the 272 cylinder piston too if you have it

 

[Huskybill]

Sounds like he was getting ready to add a turbo to that 181, not sure those gaskets would have worked, should have cut the base off another cylinder for it .
GLWS

It’s hard to start for the PO so he spaced the cylinder higher, less compression. I never knew about guys that can’t start chainsaws. I sold a ms250e to a guy who had problems starting saws.

 

[Jloomis]

372XT top end w wrist pin bearing and intake tract
View attachment 776802

I will take it.