• Please be aware that we have recently gotten a wave of users that, when researched, are found to be from Nigeria. They are trying to sell products and asking to be paid through Zelle or Venmo leaving users with no recourse if they don't ship the product. If you suspect this activity please contact admin and we will research their information to verify their location.

ArboristSite.com Sponsors


Search results

  1. Bailey's Inc.

    Morbark Feed Roller inop

    You would need to put a hydraulic pressure gauge on the lines to isolate which section has a problem if any. Your morbark dealer might be able to hook you up with a hydraulic schematic if you give them the sn (usually located on the tongue) or the last 5 of the vin. Otherwise just trace the...
  2. Bailey's Inc.

    Morbark Feed Roller inop

    Have you looked into the hydraulic pressure?
  3. Bailey's Inc.

    Trying to locate engine and wiring diagram for 172ci asphlund 4 cyl

    Thank you for your patience. The Asplundh no longer make woodchippers, but I think Altec took over parts and service. Please contact a local Altec dealer. Below is the link. Hope this helps. Where you can find Altec dealers --> https://www.altec.com/locations/
  4. Bailey's Inc.

    Trying to locate engine and wiring diagram for 172ci asphlund 4 cyl

    Hello, thank you for your question. Our office doesn't open until 8a PST. One of our experts will have to get back to you later today.
  5. Bailey's Inc.

    Nothing but site issues

    Sorry for the inconvenience, will let our dev team know about the issue. Thanks for bringing this to our attention!
  6. Bailey's Inc.

    Stihl PMX milling chain

    That PMX is a specialty ripping chain Stihl makes for Logosol. We do offer a comparable low profile 3/8 ripping chain in Woodland Pro for 17 bucks. https://www.baileysonline.com/woodlandpro-16-chainsaw-chain-loop-63rp-60-drive-links-63rp60-wpl-63rp60.html
  7. Bailey's Inc.

    Does baileys have?

    To make this work you will need 1 ORF 203RNDD009, 1 LBR 46566(sprocket nose replacement) , and 1 10000 404 (.404 tip). Looks like you will probably need 65 or 66 drive links of .404 chain. Probably better to call this one in since the website can be a little picky about "purchasing" labor (we...
  8. Bailey's Inc.

    Does baileys have?

    Closest we would have in that mount is a 20 inch ORF 203RNDD009 with the nose sprocket changed to .404.
  9. Bailey's Inc.

    Nothing but site issues

    My sincerest apologies for the inconvenience. We have been experiencing some issues on the website that we have been working to resolve. Our customers are very important to us. If you continue to have issues on the website please feel free to contact me directly at 800-322-4539 x253. Cynthia
  10. Bailey's Inc.

    Riping Chain out of stock, no reponse in inquiry

    Unfortunately the 3/8 .063 gauge ripping chain is out of stock and it's more than a month out. We do have stock of .404 .063 gauge ripping chain for a 42 inch bar if you have the ability to swap sprockets.
  11. Bailey's Inc.

    Resinoid Grinding Wheels

    Thanks for the feedback Philbert, I ran into the same problem doing a search. I finally got it to come up with just "resin" We definitely need to optimize the search function a bit.
  12. Bailey's Inc.

    Resinoid Grinding Wheels

    Hi Philbert, We still carry them they are just in a new area. https://www.baileysonline.com/molemab-black-resin-grinding-wheel-mol-a18728.html We are still fine tuning the new website and a lot of part numbers have changed/been moved around. Best Regards.
  13. Bailey's Inc.

    Disappointed with Baileys customer service

    Oh it might be a type o. would you mind sending a link so we can get it fixed? Thanks
  14. Bailey's Inc.

    Disappointed with Baileys customer service

    Correct! It seems like you might be thinking of "grinder wheels" instead of "grinding stones"? With an aluminum oxide wheel its more important to shape the contour of the wheels edge to match the chain style/size you are sharpening. You can learn more about the process here.
  15. Bailey's Inc.

    Disappointed with Baileys customer service

    I like a 7/32" file/stone for the 63 PMX chain but that's a personal preference. The manufacturer recommends a 5/32". In general is best to use the following. Grinding wheels: mini 3/8" and smaller will take an 1/8" wheel. full size 3/8" and .404 will use the 3/16" wheel Files and...
  16. Bailey's Inc.

    Disappointed with Baileys customer service

    I haven't seen the part in that picture before. If you have a part number I can check to see if its available in the states. We will however soon offer the F2 accessory package LSL 4525 001 0015 which include a bar nose steering device. We have some on the way should be here by the end of the...
  17. Bailey's Inc.

    Disappointed with Baileys customer service

    Leeroy pm me your phone number and we will get this straightened out right away!
  18. Bailey's Inc.

    You have just lost a customer!

    Thanks for the feedback :drinkingcoffee: It was an unfortunate limitation on our old website. Luckily with a newer system in place it wont be an issue anymore.
  19. Bailey's Inc.

    Disappointed with Baileys customer service

    Hi Tristin, Sorry for the lag in your emails/messages, We have all been working doubletime to get our new system implemented. I'll try and answer your questions a little better. The deluxe M8 carriage has a bar nose guard that includes a chain catch, it doesn't attach to the bar. If you are...
  20. Bailey's Inc.

    Ive tried to buy a saw from you for the last 2 days

    I apologize for the delay Flatbroke, we have recently switched to a new website and internal software packages. We had to shut down orders for a couple of days to work out all of the bugs that come with a new system. This left us with a lot of catching up to do. Glad the sales agent was able to...
Top