ArboristSite.com Sponsors


Search results

  1. scotclayshooter

    Some WTF pics.....

    Nope its in Scotland and called the Falkirk Wheel, Ive been and seen it.......Its really clever the way that it equalises the weight of both water tanks and does not need a huge amount of power to lift the boats. What they missed out on big time is the canal leading to it has low...
  2. scotclayshooter

    LM 2000 in sunny Scotland

    The cants are turned into boards, rails in fact whatever is asked for. The boards are used to make Traditional style Larch sheds, roof and floor boards or on occasion run into weatherboard. Been working there 18 months but ive been building the buildings rather than run the saw but i do...
  3. scotclayshooter

    Random pics

    My wee man, Bradley Gunn with my Brad Gun.....
  4. scotclayshooter

    LM 2000 in sunny Scotland

    Larch log, A wee bit bigger than this saw was designed for..... After 450mm x 450mm x 4,450m Larch
  5. scotclayshooter

    Some WTF pics.....

    Nope im PROPER handed.....BUT I was using the nailgun Left handed and pressing the trigger with my Thumb..... My hand was about 9" away and the nail bounced over the rail......
  6. scotclayshooter

    Some WTF pics.....

    Oops! Bloody Paslode! 90mm nail, Pulled it out with my Leatherman........
  7. scotclayshooter

    Some WTF pics.....

    Cat just seen SS Naked..... lol
  8. scotclayshooter

    Some WTF pics.....

    more likley broken down:msp_wink:
  9. scotclayshooter

    Some WTF pics.....

    If it had been our Paslode you would have been safe as the damn thing hardly fires when you want it to never mind when you dont!
  10. scotclayshooter

    Norwood blades sharpening Question....Lumbermate 2000

    Its more than just the set, Measured the hook angle as 18°........ Should be 8-10° the new norwood blades show 10° Theres a blade STUCK in a log at the moment and travel speed is down to a crawl.
  11. scotclayshooter

    Norwood blades sharpening Question....Lumbermate 2000

    Seeing as i crashed and burned with the last question I will try again lol Another affordable Band grinder is the Logosol http://www.youtube.com/watch?v=dYxihY957Dc Any good? Any reviews? any other options? Looks like we will be trying the Ripper 37 blades next week, Ripper37 | Primary Wood...
  12. scotclayshooter

    Norwood blades sharpening Question....Lumbermate 2000

    Hello again guys! I seem to have had a bit of a career change, Where I am now we have a Lumbermate 2000 (Going to be trained on it soon) The Q is with a new blade 1500Board feet is normal but when that blade goes and gets sharpened, Were only getting 300-500 BF out of it before its really dull...
  13. scotclayshooter

    Stihl bar on Makita/Dolmar using Bailieys bar adaptor. with pics!

    Its still working great, Ive ran a lot of tanks through the saw with this bar with no problems. Its oils really well BTW.
  14. scotclayshooter

    Put pictures of your fab work here...

    Hows this for fab work! This was a re-claimed farm building, But somehow it was all a bit wrong, 4 columns did not even belong to the old building and the area of concrete is a part of a 2nd WW airfield and not level!!!! My job has been to cut the columns to lenth and weld on baseplates...
  15. scotclayshooter

    so, i guess tonight is the last day for the AS forum.

    Is it that time of the year already!:msp_w00t:
  16. scotclayshooter

    so, i guess tonight is the last day for the AS forum.

    I think being Stoned got him in this fix in the first place:msp_biggrin:
  17. scotclayshooter

    Porting a 262XP

    Your one must have been ported in the past....Theres room to open up the ports on a stock one!
  18. scotclayshooter

    Some WTF pics.....

    Just had a flashback to 2 girls one cup lol
Top