ArboristSite.com Sponsors


Search results

  1. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Extra parts are common. Have been since the first kits. http://thechainsawkitguy.com https://youtube.com/the1chainsawguy
  2. Bedford T

    Big Blue MS380 Clone

    Lay it on its side. Remove chain/bar. Clean area without setting it up right. Now in good light and watching the oil vent closely, turn it up. I bet oil floods out from under the vent. Meaning it's not set down properly. I suggest if that's the case. Use a heat gun on the vent and area around...
  3. Bedford T

    Huztl MS660

    Close, open one turn out. H/L http://thechainsawkitguy.com https://youtube.com/the1chainsawguy
  4. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Naw that's not an oring on the oiler. That is thicker. Kinda like a accordion tiny tire. The small oring goes on the chain adjuster http://thechainsawkitguy.com https://youtube.com/the1chainsawguy
  5. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Doubt it's different http://thechainsawkitguy.com https://youtube.com/the1chainsawguy
  6. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Have you tested your saw? Pressure/vac http://thechainsawkitguy.com https://youtube.com/the1chainsawguy
  7. Bedford T

    FarmerTec Holzfforma G660 Purple Monster

    They are strange folks. They used a proper brake band. But they sold a zillion without a pin. http://thechainsawkitguy.com https://youtube.com/the1chainsawguy
  8. Bedford T

    FarmerTec Holzfforma G660 Purple Monster

    Here is the new top being installed and tested. Should be visible soon. Sent from my Pixel 3 XL using Tapatalk
  9. Bedford T

    FarmerTec Holzfforma G660 Purple Monster

    I will leave you with that. But testing it is a long way from a hiss. Heat can sure cause problems. Sent from my Pixel 3 XL using Tapatalk
  10. Bedford T

    FarmerTec Holzfforma G660 Purple Monster

    You might consider the 070 for milling. It's a big pig that you just leave tied up in your mill because it's to heavy to be worth anything to most users. But OMG is it a milling machine. Better oiler, bigger chain and capable of pulling longer loops through wood. I would bet you have a air leak...
  11. Bedford T

    FarmerTec Holzfforma G660 Purple Monster

    I just started a project to replace the top kit after it quit while I was cutting due to a snagged ring. I took the top off last summer and got a new job that has kept me busy learning. I found my notes. The cylinder had no gasket, nothing between case and cylinder. AND the 4 bolts were only...
  12. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    I hope this clears up the testing for you. The first part covers the cylinder/case and the second part begins after 6 mins on the fuel. If I recall correctly I covered it all in this video. chainsaw kits and packing lists http://thechainsawkitguy.com http://YouTube.com/c/the1chainsawguy
  13. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Ok just trying to point you in right direction. Two different tests on two different systems. To the other new kit builders there are two circuits you test to make sure your saws is assembled correctly. One is the fuel circuit, because of the vent the vacuum side of the pressure test is...
  14. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Why is the head leak acceptable? There are videos on how to test your saw. A hint...the fuel circuit should have a small vac leak because of the vent. Separately the cylinder should hold tight on both. I find removing the decomp and plugging is best practice. While you have a vac drawn spinning...
  15. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    The step by step already exists but requires reading the Stihl service manual chainsaw kits and packing lists http://thechainsawkitguy.com http://YouTube.com/c/the1chainsawguy
  16. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    I know the pain you feel. Do you understand running it with a leak even if it's possible can quickly burn your saw up. On the other hand getting it started with a leak can be impossible because of the way the fuel is effected and it's hard to know what it is until you know more. I am not...
  17. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Decide on a budget and spend accordingly. My website has a section on tools and part numbers. Just search Amazon for the tool your looking for. I have never seen a kit outside of stihl. Huztl has the case tool. Stihl has the best air gun and they have an awesome kit with all the flanges and...
  18. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    It is very likely you have a leak. The cylinder being tight is very important. For all the reasons you likely are aware of like not pushing fuel to the chamber. You can check for spark without special tools. chainsaw kits and packing lists http://thechainsawkitguy.com...
  19. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    Did you test it? chainsaw kits and packing lists http://thechainsawkitguy.com http://YouTube.com/c/the1chainsawguy
  20. Bedford T

    FarmerTec Huztl MS660 Updated Build Kit - Build Thread

    They have extra pieces sometimes. It looks like it goes on the tank/handle. It is likely extra. chainsaw kits and packing lists http://thechainsawkitguy.com http://YouTube.com/c/the1chainsawguy
Top