ArboristSite.com Sponsors


Search results

  1. Boomer 87

    Want to buy Echo twin parts

    In need of an inner bucking spike, and AV mounts for the rear handle bottom section for an Echo CST610EVL. thanks
  2. Boomer 87

    Splitting an 076

    Well shes all back together, and runs!!!. Sounds healthy, tons of compression. Now just need a new AV kit and a good used flywheel and well be ready to cut
  3. Boomer 87

    Splitting an 076

    Sucess! Was able to split clean and reseal the 076 today. Didnt need to use all thread. I have a shop press like a 20ton but miniature and uses a screw with a T handle so you can feel whats happening. Using thermal dynamics (heat gun and freezer), i was able to press everything together...
  4. Boomer 87

    Splitting an 076

    Very nice, i saw the repop AV kit which i will be purchasing as mine are pretty soggy. Im glad i never really ran this one since i got it. I heard the bad crank bearings so i shelved it untill i had parts, it was a good thing i had, when i got it apart the intake side piston skirt was broke off...
  5. Boomer 87

    Splitting an 076

    I appreciate all the help, i got it all apart this morning, everything came apart awesome, nothing overly tight but not loose either. I did not remove the oil pump, im going to try and leave it alone. Just thought it may have to come out to split but wasnt necessary. Now on to the parts washer...
  6. Boomer 87

    Splitting an 076

    Only other question, how does the oil pump come out? I assume straight out the front. I put a bolt in the threaded hole in the end of the pump and pulled slightly, it didnt seem to want to move. Wonder if its just stuck on an ORing maybe.
  7. Boomer 87

    Splitting an 076

    Im gonna give it a go this morning. We'll see if it plays nice
  8. Boomer 87

    Splitting an 076

    Thanks sir
  9. Boomer 87

    Splitting an 076

    So almost to the splitting point ony 076 crancase, couple questions. Does the oil pump have to be removed assuming out the front? I see the snap ring under it, but it kind of looks like its just there to center the crank in that half. Also anyone able to split one without a special press? Ive...
  10. Boomer 87

    Is this crank toast? 070 clone.

    I did buy a new clutch assembly so all those pieces had correct dimensions before i loctited it
  11. Boomer 87

    Is this crank toast? 070 clone.

    I bought an 070 clone brand new and put it on my mill. The clutch spider came loose just like yours, however i caught it immediately. It did scrape up the crank surface, but i polished it up and put some red loctite on the tapered piece and put it back together. I believe it torqued to 30ftlbs...
  12. Boomer 87

    Want to Sell Craftsman, poulan 3300, poulan pro super 380

    Bump still have the craftsman and poulan 3300
  13. Boomer 87

    Want to Sell Craftsman, poulan 3300, poulan pro super 380

    You need to start with a carb rebuild, those saws are pretty simple, probably has a tillotson HS carb on it. If memory serves i think you can get the top screw out holding the carb on, the lower one has to be loosened with a wrench, and slid back just far enough to clear the manifold, then the...
  14. Boomer 87

    Want to Sell Craftsman, poulan 3300, poulan pro super 380

    I have three saws here, first two are one craftsman and a poulan 3300. The craftsman runs but is scored, the 3300 has a great bore and runs on a prime, but the fuel tank seam leaks. So i figured id sell em as a pair, and you could take the two and make one really nice one. The wrap handle on the...
  15. Boomer 87

    The saw that you sold and wish y didn't?

    Poulan pro 475, but i know where it is, and i get first shot at gettin it back
  16. Boomer 87

    "You Suck" Thread 2019--Pics required!

    Would it change anything if i said i got a cs3900 and a homelite DM50 multi purpose saw included with the echo twin as well lol.
  17. Boomer 87

    "You Suck" Thread 2019--Pics required!

    Yeah i couldnt believe it.... super cool engineering going on inside that one
  18. Boomer 87

    "You Suck" Thread 2019--Pics required!

    Found a echo 610evl twin cylinder " evil twin" for 85 bucks
  19. Boomer 87

    Old strunk

    Thanks guys
Top