ArboristSite.com Sponsors


Search results

  1. Agent smith

    Big holzfforma black Friday sale!

    Its Chinese junk anyway. I spent alot of money exploring the cheap aftermarket world. Long story short i wish i had that money back to put towards the oem parts i should've bought in the first place.
  2. Agent smith

    028 super porting

    Yeah i think im done with this thing. Gonna move onto something else worth putting time into. Hopefully yours runs better than mine
  3. Agent smith

    028 super porting

    If i remember i cut the band .023 and yes i did a timing advance. You should leave your transfers lower and then move them up. Im curious to see if its better with them down lower
  4. Agent smith

    028 super porting

    I mean i think its alright but nothing to write home about. Compression is 190. Im wondering about raising the exhaust a few degrees but at the same time i don't want to take away any compression either
  5. Agent smith

    028 super porting

    Well if your transfers are indeed that low for some reason then youre in a good spot! You can run it where they are now and then move the transfers up gradually and see how it likes it.
  6. Agent smith

    028 super porting

    Well..... I'm not impressed
  7. Agent smith

    Bridgeless transfer ports on Stihl 026 / 260 oem

    Do you then cut the band flat or at a slight taper?
  8. Agent smith

    028 super porting

    Got the muff mod done. 5/8 id tube. Not the prettiest but its hard to weld this thin steel with a 220v mig. Atleast i didn't burn through i guess. Went with a oem wt194 carb as it has a slightly bigger venturi than the hu40/wt16 carbs and these are good running carbs.
  9. Agent smith

    Bridgeless transfer ports on Stihl 026 / 260 oem

    I dont know about on those new cylinders you got there but on the old style cylinders after you cut the base/squish 98/118/77 works pretty well
  10. Agent smith

    028 super porting

    Yeah its thinner than i wanted but this is more or less a test jug. If it works out I'll do another jug the same but do a little less with the exhaust and see what happens
  11. Agent smith

    028 super porting

    Got the intake done. Didn't lower it as it was where i wanted it. Just widened it a fuzz, smoothed out the tract and matched it to the boot. Also shortened the septum and blended it in. Finished up the exhaust and blended the upper and lower transfers together
  12. Agent smith

    028 super porting

    i usually finish off the exhaust with 320 grit and a fine buff. I don't polish intakes and transfers. I smooth those off with 120 grit and thats it. Im gonna file .020 off the key
  13. Agent smith

    028 super porting

    I do when it's a flat top piston. Not with domed pistons as it'll be off a few degrees. In that case i put the piston at whatever number im going for and use dykem and a scribe
  14. Agent smith

    028 super porting

    First off this jug is more or less a practice jug. Its still useable and ill run it to see how it performs but has scratches from the saw losing a crank bearing cut the base and squish. I cut the squish at a 1° taper These are the numbers i decided to go with and so far i hit the exhaust and...
  15. Agent smith

    028 super porting

    So ive been messing around with porting for a little while now and I've started on this 028 super. First I'll start off with saying I've been doing research for a long time and i have been reading Jennings book trying to make sense of two stroke theory. Ive built a few good runners with the...
  16. Agent smith

    stihl 026

    Mac tools makes a nice compression tester set. That's what I use and has the schrader valve right at the tips of the adapters. I don't know how often you'll be using the tester but if its often then its worth the $179 new. Theres used ones on ebay too if you wanted to save a few bucks
  17. Agent smith

    Central PA GTG - Spring 2020

    that's what it looks like from the pics and videos ive seen from them! ive never been there as that's in the harbor I do believe and I live on the southern part of Ashtabula county. About a 30 min hike. I have heard they have great food though. Maybe the gf and I will go try it out
  18. Agent smith

    Central PA GTG - Spring 2020

    following.....would like to make it to a gtg as ive never been to one. There's rarely any going on in or near ohio
  19. Agent smith

    8 pin on an Echo 590

    Really?! Wow that thing must be running way fat. It'd probably be fine with a half a turn in
  20. Agent smith

    8 pin on an Echo 590

    I can't speak for anyone else but to me it sounds like you could be lean it out a fuzz. Do a cut, shut it off immediately and pull the plug. See what color it is. Also you need an unlimited coil and different carb. You'll like the difference those two make
Top