ArboristSite.com Sponsors


Search results

  1. M

    Brush bandit 250xp with jd 4045 no start

    got it figured out. when i had the starter rebuilt, they put to much paint on the center housing of the starter motor, so when they reassembled it, it wasn't getting a ground through the housing of the starter motor. cleaned off the extra paint and runs like a champ. thanks for the help man.
  2. M

    Brush bandit 250xp with jd 4045 no start

    yeah that's what i'm thinking. i'll gladly pay the 130 or 260 at this point. this thing has me stressing out and wasting time
  3. M

    Brush bandit 250xp with jd 4045 no start

    $130 an hour so not to bad. as long as the have competent mechanics and doesn't take more that a few hours to fix
  4. M

    Brush bandit 250xp with jd 4045 no start

    a certified rebuilder where i live. he does all my starters for my tractors and trucks. never once had a problem with him. does awesome work. and he's busy as heck so not sure he would even have the time to help me. also i think dealer could pull up codes and run a diagnostics test. so would...
  5. M

    Brush bandit 250xp with jd 4045 no start

    solenoids working. also brand new. how would i test relays?
  6. M

    Brush bandit 250xp with jd 4045 no start

    starter is freshly rebuild. as in had it rebuild two days ago. had them even bench test it in front of me b4 i left the rebuild shop. so starter is good to go. also battery is brand new also. starts my tractor no problem. so that's also not an issue. as far as this thing goes, i'm maxes out on...
  7. M

    Brush bandit 250xp with jd 4045 no start

    yes starter doesn't engage at all. turn ignition and tack tack tack, but the tack noise is only coming from the starter relay solenoid. if i take it out and jump it directly from a battery, then the starter works fine. put it back in, hook it back up and nothing. i am getting 12 volts to...
  8. M

    Brush bandit 250xp with jd 4045 no start

    ok will do. could you possibly walk me through testing the starter wire from the ignition switch at the starter side? i have a meter, i'm just not good with knowing what to rest when it comes to electric stuff. i have not replaced the ignition switch, will do that as well most likely. but will...
  9. M

    Brush bandit 250xp with jd 4045 no start

    got 12.6 volts at the end of battery cables.
  10. M

    Bandit 1390xp quitting!!!

    would a bad murphy switch keep the starter from engaging? i'm just getting tack tack tack from the starter solenoid relay when turning the key. zero engagement from the starter, freshly rebuilt starter, new starter solenoid relay, brand spanking new battery and all wires cleaned and tested for...
  11. M

    Brush bandit 250xp with jd 4045 no start

    could you elaborate on this please. take two wires out of the circuit and join them? walk me through this please. i'm having the same problem where my chipper wont even try to engage my starter even with new battery, new starter solenoid relay and a freshly rebuilt starter. so if anyone could...
  12. M

    250XP starter

    late reply but yes super easy and strait forward. same as most cars/trucks. no tricks. just be sure to disconnect battery first.
  13. M

    Help. 2013 bandit 250xp no crank

    yes i have. cleaned all the ground connections on battery/starter side. from battery to starter to ground on block. i have heard about the good pins, how do i test those or bypass them just to eliminate possible problems? also is that the murphy switch? or is the murphy switch in the control...
  14. M

    Help. 2013 bandit 250xp no crank

    so since getting the machine back, i've had the starter rebuilt, new battery installed and new starter solenoid relay put in, and nothing still. while the starter is in the machine and hooked up, i can't jump it at all, take the starter out and i can jump the starter no problem. put the starter...
Top