ArboristSite.com Sponsors


Search results

  1. cgraham1

    SOLD!!!! Husqvarna 2101XP Powerhead

    I’ve got one also. It’s just a later version of the 2100.
  2. cgraham1

    SOLD!!!! Husqvarna 2101XP Powerhead

    That’s a good price.
  3. cgraham1

    SOLD!!!! 10mm Stihl 044 project

    Cool. I had one but I just sold it. It was a runner though.
  4. cgraham1

    SOLD!!!! 10mm Stihl 044 project

    True. Use a 12 mm piston and 10mm cylinder.
  5. cgraham1

    SOLD!!!! STIHL 044

    OEM tank handle? Obviously from/for a 440.
  6. cgraham1

    SOLD!!!! 1986 two cylinder echo

    If you don’t have an asking price, post it on eBay and sell it to the highest bidder. This isn’t an auction site.
  7. cgraham1

    SOLD!!!! 10mm Stihl 044 project

    MS440 is a better saw. I’d just stick the 10mm P&C on the newer saw and have the best of both worlds.
  8. cgraham1

    Want to buy Pot and piston

    Put a Dolmar 7910 top end on it. Will need machine work, but it’s definitely doable. Mine was done by Randy Evans.
  9. cgraham1

    SOLD!!!! Dolmar 7900 w/wrap

    That’s a good deal. The wrap handle alone is way over $100.
  10. cgraham1

    SOLD!!!! 36" Total Super Bar for large mount Husqvarna

    How much to California?
  11. cgraham1

    SOLD!!!! STIHL 044 c

    I’d much rather have an old o44 than a 441.
  12. cgraham1

    Best saw to pull a 40"+/- bar?

    Would any of these pull a 42” bar? ;)
  13. cgraham1

    Want to Sell Homelite Super XL 925

    Selling here sucks azz. But I still have the saw in my shed.
  14. cgraham1

    Jonsered 2152 Uticor

    I’ve had a bunch of Jonsereds... some said ‘Ulticor’ on them, some didn’t. I don’t think it means anything... just marketing.
  15. cgraham1

    Jonsered 2152 Uticor

    I had a 2152 that I converted to a 2153 with an OEM 346xp/2153 P&C, and a 357xp/359 intake and carb, along with some mild port work... it was a fine little saw, but I never really used it, so it got sold at some point... But yes, it is basically a 346 with a different top end and muffler.
  16. cgraham1

    Need assistance tracking down a builder

    As a small business owner, I understand how easy it is to get behind schedule and/or behind financially... but that doesn’t excuse the lack of communication from this business. It’s just not that hard to pick up the phone and tell someone what’s going on with their job. I can excuse a guy for...
  17. cgraham1

    Repair rebuild any saw flat fee

    Saw a guy posting that on eBay a while back.
  18. cgraham1

    Husqvarna 42 Special Parts Saw Value

    I got a complete 242 for $75. It needs a carb rebuild (Bottom one in the pic). They are desirable saws... but parts are hard to come by and it’s probably worth $100 just in parts. Seeing as how it’s been listed for a while, it wouldn’t hurt to offer less and see if he will let it go cheap.
  19. cgraham1

    Husqvarna 42 Special Parts Saw Value

    I got a complete 242 for $75. It needs a carb rebuild (Bottom one in the pic). They are desirable saws... but parts are hard to come by and it’s probably worth $100 just in parts. Seeing as how it’s been listed for a while, it wouldn’t hurt to offer less and see if he will let it go cheap.
Top