ArboristSite.com Sponsors


Search results

  1. samhop

    Any Woodmaxx kinetic splitter owners out there?

    you get what you pay for - go to the sorce and get the real thing you will not regret it
  2. samhop

    Supersplit extension table

    2nd for cup holder but put it on the smart end
  3. samhop

    found my old mill

    nothing on the drawing board for build plans. but want to try and do some slabs for live edge "or whats left of it" table , coffee table, bench, or try to sell. I dont sell cord wood anymore. Cant burn all the dead wood, I dont get to most of it till the sap wood and all the small diameter...
  4. samhop

    found my old mill

    anyone got a feeling on how thick should I make Oak slabs from some 3 year standing dead.
  5. samhop

    biggest power on a supper splitter

    i ripped the bolts out of the push plate slide. had to add some gussets and weld it up. if i pull the bolts again i will tap the through holes in the intermediate block and bolt the push bar to the block with a bigger bolt instead of going through the block and into the 1/2" slide plate not...
  6. samhop

    found my old mill

    I got to try out my old Granburg chainsaw mill did some 5/4 Cheery planks went well considering i have never milled anything before thanks to everyone that contributes all the good info hear. props to BobL hope your doing alright with the fires down there. only problems were one of the 2 small...
  7. samhop

    biggest power on a supper splitter

    i ran some knotty old apple crotches that i had put to the side because of the odd shapes and sizes. the extra power really is nice to have. once the initial hit is spent the 16:1 reduction dogs the motor a little and it jest powers through the tough bits.
  8. samhop

    Small Granberg Alaskan Mill-Is it all there?

    thanks for posting the pics of your mill.now i know that i have a old Granberg
  9. samhop

    found my old mill

    still need to add the ex-oil and take the chain to 10 degrees. probably should run a few tanks through it before i mill what should i start with Green Cherry or 3 year standing dead oak?
  10. samhop

    biggest power on a supper splitter

    finely got around to replacing the old engine on my super splitter and in keeping with the them of MORE is better i uped the power a teeny bit. my experience is that the 16:1 reduction powers through a lot after the flywheels have unloaded there juice.
  11. samhop

    found my old mill

    thanks i went as short as i could with both ends of the bar saw and helper handle adjusted in as short as they would go. worked ok the kit saw spun the fly wheel and munched the key way. so thats out of action till the mail from china gets hear. got a piece of cherry i want to mill but dont...
  12. samhop

    found my old mill

    now the slot with the helper handle is 10mm and the one with the kit saw is 14mm had to drill 2 more oil holes. Next I need to see if i can get the chain made up and mounted
  13. samhop

    Want to Sell NIB Husky 288xp, 353, Stihl 660, 070, 381, Echo CS-1201

    you want your beer back now
  14. samhop

    Want to Sell NIB Husky 288xp, 353, Stihl 660, 070, 381, Echo CS-1201

    thanks Robin package received
  15. samhop

    Want to Sell NIB Husky 288xp, 353, Stihl 660, 070, 381, Echo CS-1201

    thanks for the explanation Robin
  16. samhop

    Want to Sell NIB Husky 288xp, 353, Stihl 660, 070, 381, Echo CS-1201

    Another week will be about 2 mounths is that unlucky I don't know if luck plays into it I would asume ferst in ferst out. Anyway I know you will make good on it thanks Robin have a safe week I'm going offshore for about 10 day sea scallop trip. Hopefully have some info for me buy the time we get...
  17. samhop

    Want to Sell NIB Husky 288xp, 353, Stihl 660, 070, 381, Echo CS-1201

    thanks for the update standing buy for shipping info
  18. samhop

    SOLD!!!! Sprocket nose 3 Rivet 404 Oregon

    thank you
  19. samhop

    Wood splitter advice

    1k mi + drive and a boat ride
  20. samhop

    Wood splitter advice

    @naster come and get it
Top