I thienk dat place ess three shits to the wind man!
Did his parents have any children that lived?
Any chance you slide it over your wrist to one hand the saw?
Ain't nothin worse than when a scag leaves crabs on your bike seat---sucks!
was that an eclipse?
The saw is a little rocket now, thanks for all the help folks.
DIARY OF A BRAIN DEAD MECHANIC
I pulled the carb and took off the diaphragm cover, low and behold! three little holes staring at me from where the...
Tell me a little more about the check valve function and is it replaceable, please.
I had never had this 144 apart before so I didn't inspect the interior of it that well. In the middle of the night last night, I got a vision of...
The first thing to break on marble and tile is the corners, he should be putting a dab of thin set on all of them before he places the tile.
changed coils and left all the wires off, two different plugs, lowered the diaphragm lever a couple .002 below the top plate, have turned the set...
If I blow it out and crank it several times it will start and die. Most often with a little wet fuel on the muffler.
I did a little porting and lowering on this saw and it is putting out about 175 psi. Hdc carb kept flooding so I finally set it up with a hda144...
I have a hda144a but the primer hole is in a different location.
This one has the hdc and it really wanted to flood bad. I sonic cleaned it and put in a kit but found that the diaphragm had a longer center...
I haven't pulled them yet so don't have any figures. Been fighting the carburetor and think they may be why. Guess I'll vac it to be sure. Thanks.
Looking for crank seals for a 44, anybody know what fits? None of the sites seem to have the oem. Thanks
been all rain, I'll check it thanks!
It is listed under trees of north america? I found some more pictures that look a lot more like it.
Separate names with a comma.