ArboristSite.com Sponsors


Search results

  1. tallfarmboy

    Want to buy Jonsered 2150 Case/Engine Housing

    Back from the dead... LOL! Sent from my Moto G (5) Plus using Tapatalk
  2. tallfarmboy

    Want to Sell Stihl 3/8" 12" Bars/Chains/Sprockets

    Well, I already went ahead and bought a matching 1/4" Picco bar and chain... so, I don't need it now. However, it should sell, easily. Thank you! TFB
  3. tallfarmboy

    Want to Sell Stihl 3/8" 12" Bars/Chains/Sprockets

    I realize that this is an older post... but, would you be willing to sell one of the 3/8 Picco spur sprockets? I have a good 3/8LP bar and chain, but my current sprocket is 1/4" micro picco and I don't have a bar/chain for it. Let me know if you'd be interested in selling one of the sprockets...
  4. tallfarmboy

    Want to Sell Kawasaki KTR27A Trimmer Parts

    I'm sorry, I don't have the grommet left. You can still purchase those new, though. Should be able to find one online somewhere. Sent from my Moto G (5) Plus using Tapatalk
  5. tallfarmboy

    What to do? - High Speed MS170/180 14.2-15K!

    I would definitely look into getting an aftermarket carburetor that has H and L adjustment screws. Easy way to improve those saws. Sent from my Moto G (5) Plus using Tapatalk
  6. tallfarmboy

    Want to Sell Kawasaki KTR27A Trimmer Parts

    Give me a couple minutes to check. I don't think I have the grommet still, but I'll check. Sent from my Moto G (5) Plus using Tapatalk
  7. tallfarmboy

    Want to buy Stihl MS150T Parts

    I'm looking for some parts for a MS150T. I really need a brake handle and possibly a piston/cylinder if anyone has access to some used parts. I've got 2 MS150T's, one is complete with a broken brake handle, the other one is missing clutch and chain cover items.... Both have low compression...
  8. tallfarmboy

    Husky 345 problems

    Pull your muffler, see what the piston looks like... Is there any chance that you put straight gas in it? Sent from my Moto G (5) Plus using Tapatalk
  9. tallfarmboy

    Chain Filing Training Videos?

    I really don't like the depth gauge tool on the file guide. I never feel like I get it to read consistently. Sent from my Moto G (5) Plus using Tapatalk
  10. tallfarmboy

    Walbro wt739 rebuild..which one do I use?

    You'll want to use the tan one... I believe those are the ones that are more compatible with Ethanol in fuel. Sent from my Moto G (5) Plus using Tapatalk
  11. tallfarmboy

    Chain Filing Training Videos?

    http://amzn.to/2FDAIls Don't need a dealer to buy one. 3/8 or .325. In my opinion, they are the best option for hand filing. Sent from my Moto G (5) Plus using Tapatalk
  12. tallfarmboy

    Chain Filing Training Videos?

    Sent from my Moto G (5) Plus using Tapatalk
  13. tallfarmboy

    272xp trouble

    Have you tried richening the H and perhaps L screw at all? If not, try backing the H screw out 1/4 turn counterclockwise and try again.... If it makes it better, try a little more adjustment... Sometimes a little goes a long way. Sent from my Moto G (5) Plus using Tapatalk
  14. tallfarmboy

    Walbro WJ39 on 394xp Throttle Shaft Leaking

    I don't plan on doing anything else with this carb as the saw is getting a new carb... But, when I sprayed the throttle shaft area while the saw was running, it would bog out and die. Wouldn't it make sense that it would be tough to tune with that big of an air leak? More info... When I received...
  15. tallfarmboy

    Walbro WJ39 on 394xp Throttle Shaft Leaking

    When I get the replacement, I will post again to share the results. If it fixes the problem, I will be very happy to swap it with you. I'm sorry if I sounded accusatory... It was more aimed at the comment of the person above. I don't ever include a carb on a pressure test, but I had eliminated...
  16. tallfarmboy

    Walbro WJ39 on 394xp Throttle Shaft Leaking

    Guys, I know how to pressure test the crankcase... This saw passes a vac and pressure test 100%... But, it still didn't idle right... Fluttering and would slowly die... So, I decided to try to pressure the carb side of things. This was my result, seems like a massive air leak at the throttle...
  17. tallfarmboy

    Walbro WJ39 on 394xp Throttle Shaft Leaking

    I know that it's going to leak air passed the butterfly... I have the carb sealed off between the elbow and carb body. Pressurized the crankcase and it only leaks opposite of the throttle cable on the throttle shaft. It leaks pretty bad, in my opinion. When I start the saw and spray carb cleaner...
  18. tallfarmboy

    Walbro WJ39 on 394xp Throttle Shaft Leaking

    Thanks for the reply! I did rebuild the carb, so it has new internals. I removed the throttle butterfly and slid the shaft out a little to inspect. It did have a tiny little bit of play in it. The owner decided to just purchase a new carburetor, so I went on ebay and purchased a new WJ71. There...
  19. tallfarmboy

    Walbro WJ39 on 394xp Throttle Shaft Leaking

    I should add that if I moved the Gorilla tape to the other side of the carburetor, it passed vacuum and pressure test. No leakage.
  20. tallfarmboy

    Walbro WJ39 on 394xp Throttle Shaft Leaking

    Working on a very high hour 394xp... Had a cracked intake block, replaced that, but the saw still won't idle down like it should. I blocked off the outside of the carb, between the filter elbow and carb housing with Gorilla tape and pressure test found a big leak at the throttle shaft. Anyway, I...
Top